【摘 要】
：
Porous anodic aluminum oxide (AAO) films were fabricated electrochemically in different preparation conditions such as in the mixed electrolytes with various volume ratios of 0.3M C2H2O4 and 0.3M H2SO
【机 构】
：
College of Physics and Electronic Engineering,Northwest Normal University,Lanzhou 730070,China
【出 处】
：
第四届国际表面与界面科学与工程学术会议(The Fourth International Conference on S
论文部分内容阅读
Porous anodic aluminum oxide (AAO) films were fabricated electrochemically in different preparation conditions such as in the mixed electrolytes with various volume ratios of 0.3M C2H2O4 and 0.3M H2SO4,in pure oxalic acid solution under different anodizing voltage and time.The transmission spectra with the interference fringes were measured and the modified Swanepoei method was used to determine the optical constants of the free standing AAO films.The calculated thickness agrees well with the measured thickness from the FE-SEM images of the cross section,which indicates that the modified Swanepoel method is very fit for the determination of the optical constants of the free standing AAO films.Meantime,the influence of the preparation conditions on the measured optical constants and the physical thickness of the AAO films were discussed.The optical band gap is appropriately fitted to the direct transition model proposed by Tsuc in the strong-absorption region of investigated films,and is derived from Taucs extrapolation.The reasons were investigated.Acknowledgements The Authors are grateful to the support of the National Natural Science Foundation of China (Grant No.10774121),the Natural Science Foundation of Gansu Province of China (Grant No.0803RJZA102),the Foundation of National Key Laboratory of Surface Engineering (Grant No.9140C540202090C54),.the Foundation of Northwest Normal University (Grant No.NWNU-KJCXGC-03-22),and the Foundation of Education Bureau of Gansu Province of China (Grant No.0801-09).
其他文献
Hydrogenated silicon oxynitride (SiON∶H) could be used as a passivation layer,especially on the back side of the cell.In this work,it were deposited on crystalline silicon substrates by medium frequen
Surface passivation is one of the key factors to the high efficiency solar cells.In this paper (Al2O3)x(TiO2)1-x dielectric films used as backside surface passivation for crystalline silicon solar cel
Gettering process is commonly used to increase the minority carrier lifetime of silicon wafers and thus the conversion efficiencies of the solar cells fabricated on the wafers.In this paper,the effect
The Al-AlN granular films with different resistivity were deposited for serving as the Surface-conduction Electron-emission Display (SED) cathode materials and the effect of the different resistivity
High density of Sn quantum dots (QDs) have been grown epitaxially on Si(001) substrate by solid phase epitaxy (SPE).The dependences of morphology and crystallinity of Sn QDs on the Sn coverage,anneali
p-type ZnO thin films were prepared by thermal oxidation of rf magnetron sputtered Zn3N2∶Al films on glass substrates.The effects of oxidation temperature on the structural,optical and electrical prop
Anedic titanium oxidization (ATO) is a relatively simple technique that can be easily automated for preparing TiO2 nanotube arrays with high specific surface area.In the present work,we demonstrate th
Ti-W-N thin films were deposited by reactive RF sputtering with a W-Ti(30 at.%) target in an argon/nitrogen atmosphere.The nitrogen partial pressure ratio in the growth chamber was varied from 0 to 11