【摘 要】
：
Thin Y1-xYbxBCO films on LaAlO3 (LAO) (001) substrates were prepared by low-fluorine metal organic deposition (MOD) in order to investigate the effect of Yb substitution on the microstructure and the
【机 构】
：
Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province
论文部分内容阅读
Thin Y1-xYbxBCO films on LaAlO3 (LAO) (001) substrates were prepared by low-fluorine metal organic deposition (MOD) in order to investigate the effect of Yb substitution on the microstructure and the physical properties.Single-phase, c-axial-aligned Y1-xYbxBCO films were obtained, without any trace of YBCO and YbBCO phases.The variation of texture and morphology was studied as a function of the Yb content in these Y1-xYbxBCO films.The Yb substitution had only a slight effect on the critical temperature (Tc)of Y1-xYbxBCO films, but it had a strong effect on the in-field critical current density (Jc)values.As compared to pure YBCO films, the Jc values of the Y1-xYbxBCO films decreased at low fields (<0.5 T) but increased significantly at high fields.
其他文献
To reduce the weld seams and to enhance the operating safety, the steam generator of a nuclear power plant is nowadays widely de-signed with the integral technique.The integrated conical shell is one
In the process of continuous casting, the M-EMS (mold-electromagnetic stirring) is effectively to solve defects and ensure the high quality of casting blanks.The metallurgical effects of M-EMS is asso
Ice-coated overhead transmission lines easily occur line breaking.This article described the static analysis and dynamic analysis performed on the transmission lines by finite element method (FEM).The
A heat transfer model for initial solidification region of liquid steel has been established in this paper, which the calculation region includes steel, mold flux film and mold copper plate.The effect
A multiscale simulation method, qausicontinuum(QC) method was applied to study the nanoindentation with a cylindrical indenter and a single crystal aluminum substrate.In the indentation process, the r
本文采用卷对卷MOCVD工艺在镀有IBAD MgO缓冲层结构的Hastelloy合金衬底上制备出了高性能的REBCO薄膜带材.为了进一步改善REBCO薄膜带材的性能，我们对不同条件下生长的薄膜中的稀土氧化物RE2O3沉淀相进行了研究.针对纯YBCO薄膜、Gd0.5Y0.5BCO薄膜、纯GdBCO薄膜，在稀土元素过量掺杂的条件下，通过调整稀土元素的比例，采用XRD系统地分析了(GdxY1-x)2O3
化学溶液方法是一种生长功能氧化物薄膜的重要技术。它具有成本低廉，可精确控制薄膜成分、化学剂量比，且可以快速制备大面积薄膜等优点，它已被广泛地应用到制备具有层状结构的涂层导体中。本文简要地回顾了世界上在该领域的进展，并综述了我科研小组近期在这一方向所取得的研究成果。其中包括采用金属有机盐沉积技术路线，在织构NiW合金基带上生长具有萤石结构的CeO2基帽子层和烧绿石结构的Gd2Zr2O7隔离层。采用先
Adopting chemical etching to strip the Stabilizers of YBCO superconducting tapes (Cu and Ag layer).Studying the effects of different ratio and temperature of etching solution (NH3.H2O and H2O2), corro
Biaxially textured YBa2Cu3O7-x + xYBiO3 (x =0, 2.0, 5.0 and10.0 wt.%) films were prepared on (001) LaAlO3 substrate by self-developed non-fluorine polymer-assisted chemical solution deposition (PA-CSD
重费米子材料CeCoIn5表现出很多类似于高温铜氧化物和铁基超导体的奇异物性，大量实验表明其超导由反铁磁自旋涨落引起，表现出d波的非常规超导态。为更好地确认其dx2-y2波配对对称性，我们从CeCoh5的双能带模型出发，通过考虑杂质散射，应用T矩阵近似和格林函数的方法，在弱散射和强散射情况下，分别计算其在费米能级附近的杂质共振态。我们发现杂质引起的共振态是局域的，并且其空间调制强烈依赖于d波序参量