大型分块介质天线罩电性能提升技术研究

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户:RaymanL
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  本文采用阻抗匹配技术,利用金属栅网电调谐单元,对大型分块介质天线罩的板块接缝(或称加强肋)进行了电调谐优化设计,优化设计的含有金属栅网的混合介质结构,在保证接缝结构力学性能的前提下,其透波性能比板块接缝本身的透波率提升约20%,而且通过加载不同的金属栅网,可以调整混合结构最佳透波的频率范围,从而可用于不同频段天线罩的研制,为研制高性能大型介质天线罩提供了一条新的技术途径。
其他文献
A kind of CoO hexagon plate was synthesized by a simple solution precipitation method.Three samples with different edge lengths can be synthesized just by changing the moment of alkali.Then the layere
In order to obtain uniform dispersion of graphene throughout poly(vinyl chloride) (PVC) matrix and significant mechanical reinforcement of the graphene/PVC composites in a simply way, we first synthes
本文采用溶液共混法,以纳米碳酸钙(nano-CaCO3)和纳米碳化硅(nano-SiC)作为增强剂,改性聚乳酸(PLA)制备了PLA基复合材料,并对PLA复合材料的断裂韧性及力学性能进行了研究.实验结果表明,当nano-CaCO3和nano-SiC含量分别为0.5%和1%时,nano-CaCO3/PLA和nano-SiC/PLA复合材料的断裂韧性达到最大值,分别比改性前提高了116%和154%.
A series of poly (phthalazinone ether sulfone ketone) (PPESK)/multi-walled carbon nanotube (MWCNT) buckypaper nanocomposites with different contents of MWCNT was fabricated by heat press process with
Octylic acid(OA)/myristic acid(MA) proposed is a kind of phase change materials(PCMs) with great development potential, but its further application is limited due to its lower thermal conductivity.
MnO2/reduced graphene oxide (RGO) composites are synthesized by a simple hydrothermal method and characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron
会议
Petal-like MnO2/reduced graphene oxide (RGO) composites are fabricated via a simple hydrothermal process and used to construct supercapacitors as electrode materials with high loading mass of active m
Owing to its extremely high surface area as well as fantastic hydrophobic and mechanical, electrical properties, lipophilic graphene nanosheets have attracted much attention in many potential applicat
In this work, the long glass fiber reinforced PP (LCFGF/PP) composites were prepared by a convenient process of melt impregnation assisted by a double screw extruder to improve continuous long fiber c
采用粘稠塑性加工方法制备了方形锆钛酸铅压电纤维复合材料,研究了环氧树脂中不同TiO2含量对压电纤维复合材料的电学阻抗、介电性能、抗拉以及驱动应变性能的影响。结果 表明:环氧树脂中TiO2含量不同,压电纤维复合材料的谐振频率略有差别。随着环氧树脂中TiO2含量增多,压电纤维复合材料的电容值增大,但其抗拉强度及纵向自由应变值均表现出先增加后减小的规律。