【摘 要】
：
Cell studies at the single-cell level are becoming more and more critical for understanding the complex biological processes.Here,we present an optimization study investigating the positioning of sing
【机 构】
：
Key Laboratory of Micro/Nano Systems for Aerospace,Ministry of Education and School of Mechanical En
论文部分内容阅读
Cell studies at the single-cell level are becoming more and more critical for understanding the complex biological processes.Here,we present an optimization study investigating the positioning of single cells using micromolding in capillaries technology coupled with the cytophobic biomaterial poly (2-hydroxyethyl methacrylate) (poly (HEMA)).As a cytophobic biomaterial,poly (HEMA) was used to inhibit cells,whereas the glass was used as the substrate to provide a cell adhesive background.The poly (HEMA) chemical barrier was obtained using MIMIC,and the microchannel networks used for capillarity were easily achieved by reversibly bonding the polydimethylsiloxane (PDMS) mold and the glass.Finally,discrete cell adhesion regions were presented on the glass surface.This method is facile and low cost,and the reagents are commercially available.We validated the cytophobic abilities of the poly (HEMA),optimized the channel parameters for higher quality and more stable poly (HEMA) patterns by investigating the effects of changing the aspect ratio and the width of the microchannel on the poly (HEMA) grid pattern,and improved the single-cell occupancy by optimizing the dimensions of the cell adhesion regions.
其他文献
As a typical kinds of toxic gases,CO plays an important role in environmental monitoring,control of chemical processes,space missions,agricultural and medical applications.Graphene is considered a pot
Generally,the 3ω method for the measurement of fluid thermal properties is based on an approximate solution to heat conduction model assuming vanishing heater-thickness,no dielectric layer and infinit
Thin-film Au electrodes prepared by magnetron sputtering method were used to develop a potentiometric CO2 gas sensor.The thermal evaporated Li3PO4 played the role of electrolyte and sensing material.T
Surface Acoustic Wave (SAW) sensors and micro-electromechanical system (MEMS) technology provide a promising solution for measurement in harsh environments such as gas turbines.In this paper,a SAW res
The temperature sensor presented herein based on microwave dielectric resonator,using alumina ceramic as substrate to survive in harsh environment.The resonant frequency of resonator is determined by
This paper reports fabrication and characterization of ZnO nanotubes on Au cylindrical spirals.Highly oriented single-crystalline ZnO nanorods were hydrothermally synthesized on Au cylindrical spirals
Low temperature process is important for capacitive micromachined ultrasonic transducers (CMUTs) to integrate with integrated circuits (ICs) in order to reduce parasitic capacitance and improve its de
In this study,oriented rutile TiO2nanorod arrays (NRAs) were directly grown on the titanium (Ti) thin films deposited on the Si substrate in a low concentration of hydrochloric acid aqueous solution v
The fabrication and utilization of micro-fluidic chips require deep insights into nanofluidics.In spite of the numerical theoretical research on relationship of interface wettability and slip length,t
To date,there are few researches on capacitive micromachined ultrasonic transducer (CMUT) to measure the ultra-low pressure.The graphene-based CMUT was proposed for the measurement of the ultra-low pr