【摘 要】
：
Objective:To investigate the effectively corrective methods of prominent mandibular angle or wide and long mentum.Methods:The author introduces the original man
【机 构】
：
Department of plastic surgery, xijinghospital ,thefouth military medical university ,Xi 'an 710032
论文部分内容阅读
Objective:To investigate the effectively corrective methods of prominent mandibular angle or wide and long mentum.Methods:The author introduces the original mandibular resectionwith super long curve andouter cortex grinding operation,can also correct mandible Angle,mandibular body and the mental wide deformity at the same time.
其他文献
大棚内,春季在苋菜内套作蕹菜,之后在棚内两侧套作丝瓜,夏秋种蒜、间栽小白菜。据调查,这种间套作模式,每667平方米年产量可达9200公斤,产值达1.85万元,纯收入1.45万元。其
Autologous fat transplantation is popular for the repair of soft-tissue defects in clinical practices.It can be widely applied in soft-tissue augmentation,such
针对管材的精密分离问题,提出了偏心轮高速旋转弯曲疲劳加载的分离方法,为促使管材外表面环状V形缺口根部的疲劳裂纹快速萌生,对管材外表面环状V型缺口的应力集中效应进行了
采用Gleeble-3500热模拟试验机研究了7A75铝合金的热变形行为,构建了热加工图,并借助EBSD和TEM表征了热变形后的微观组织.结果 表明:在350℃/10 s-1和490℃/0.01 s-1条件下出
Background The thick skin,weak lower lateral cartilages,small septal cartilages and unprojected nasal tips are common in cosmetic rhinoplasty in China.The most
Objective:Progressive facial hemiatrophy is characterised by slowly progressive atrophy of one side of the face,primarily involving the subcutaneous tissue and
利用Gleeble-3800热模拟试验机对锻态MoNb合金进行了等温恒应变速率压缩实验,研究了其在变形温度为900～1200℃、应变速率为0.01～10 s-1时的高温变形行为.结合实验数据和BP算法
对热型水平连铸制备的Cu-0.52Ag-0.22Cr铸态杆坯进行拉拔塑性变形(Φ16.00 mmΦ6.00 mm)和时效热处理(450℃×2 h)后,进一步对Φ6 mm时效态试样进行了不同变形量(59.7％、75.0％
对TA1铆钉进行了电磁铆接工艺试验,利用光学显微镜和扫描电镜进行了微观组织结构观察,研究加载电压对TA1铆钉镦头变形的影响,分析绝热剪切带内微观组织演变以及带的萌生与扩
针对GH4169高温合金切削加工过程中切削力大、 切削温度高以及刀具磨损严重等问题,通过电塑性辅助铣削实验研究了脉冲电流对平均切削力、切削温度以及刀具磨损的影响规律.结