【摘 要】
：
It is of both academic and industrial interests to to understand and be able to model how the formation and evolution of different microstructures and textures during and after extrusion.The current w
【机 构】
：
Department of Materials Science and Engineering, Norwegian University of Science and Technology, Nor
【出 处】
：
15th International Conference on Aluminium Alloys(ICAA15)(第十
论文部分内容阅读
It is of both academic and industrial interests to to understand and be able to model how the formation and evolution of different microstructures and textures during and after extrusion.The current work implemented a physical-based extrusion microstructure modelling framework.The modelling framework includes a FEM (HyperXtrude) model to account for the deformation histories along a set of particle paths during extrusion.
其他文献
为研究表面内嵌GFRP筋加固后混凝土梁的受弯性能及影响因素,对7根不同混凝土强度等级、配筋率和附加锚固的T形梁进行静力试验研究.结果表明,此加固方法能够很好地改善加固梁的受弯性能,且主要影响加固梁的破坏阶段.有附加锚固加固梁发生弯曲破坏,开裂荷载没有提高,屈服荷载提高15.32％～35.87％,极限荷载提高40.07％～53.52％,刚度有所提高,位移、延性有所降低,裂缝与钢筋应变发展有所延缓.无
针对淄博市G309国道上宋家庄公铁立交桥挠度变形监测需求,本文提出基于张正友标定的DIC桥梁挠度监测方法.该方法使用CCD相机跟踪靶标位置变化,引入张正友方法标定CCD相机内外参数,并结合数字图像相关方法测量桥梁挠度.对比试验结果表明张正友标定的DIC方法具有较高精度.使用MATLAB编译宋家庄公铁立交桥挠度监测软件,并集成宋家庄公铁立交桥挠度监测系统.该系统可实现4通道CCD相机的图像预览、同步
Isothermal compression tests were performed for an as-extruded AA2099 Al-Li alloy by a thermal-mechanical simulator (Gleeble 3800) at temperatures ranging from 360 ℃ to 520 ℃ and strain rates ranging
The effects of final forging temperatures on deformability and structure evolution of high purity aluminum during multi-directional forging process were investigated.The results showed that increasing
The properties of Al-alloys extusions for automotive applications are largely controlled by the microstructure and crystallographic texture of the final extruded product.In this talk, the linkage betw
A quantitative approach to the determination of the phase composition in the Al-Mg(Cu)-Li alloys has been developed on the basis of the balance equations of chemical and phase compositions as well as
Strengthening of metals by plastic deformation is of universal interest, with the current focus being on deformation to high strains to produce materials with ultrafine structures and high strengths.T
The present study investigated the effect of intermediate annealing temperatures on the microstructure, mechanical properties and conductivity of Al-0.2Mg-0.35Si-0.3Ce wire rod (experienced hot extrus
Hemming is an important joining method whereby external Al-Mg-Si automotive body sheets are bent by 180° around the internal panels.Large strains associated with the bending can lead to failures such
Several cold rolled 3xxx aluminium alloys with varying chemical content and different homogenizing treatments have been annealed using different heating and cooling techniques.The heating and cooling