论文部分内容阅读
LiBH4因其具有很高的质量储氢密度(18.4wt％)和体积储氢密度(121kg/m3)而备受关注,但LiBH4存在热稳定性高和脱氢动力学差的缺点.其脱氢温度高达400℃以上,且1小时内400℃的条件下仅有1.6wt％的脱氢量[1].
LiBH4掺杂LiOHNaOHKOH的脱氢性能研究
【摘 要】
：
LiBH4因其具有很高的质量储氢密度(18.4wt％)和体积储氢密度(121kg/m3)而备受关注,但LiBH4存在热稳定性高和脱氢动力学差的缺点.其脱氢温度高达400℃以上,且1小时内400℃的条件
【机 构】
：
华南理工大学材料学院金属材料系,广东省先进储能材料重点实验室,广州,510640
【出 处】
：
“氢”出于蓝·2013全国博士生学术论坛
【发表日期】
：
2013年9期
其他文献
丙烯酸是一种重要的聚合物合成中间体原料，工业 上主要采用基于不可再生石油原料的丙烯催化氧化制取丙烯酸。利用生物质衍生物乳酸脱水制备丙烯酸是取代丙烯氧化、实现丙
Facile Synthesis of Carbon-coated Titanium Nitride Nanotubes with Enhanced Electrocatalytic Activity
The high price of platinum (Pt) based cathode catalysts for the oxygen reduction reaction (ORR) have slowed down the practical application of fuel cells.[1]
The ability to control the visibility of an object is a magic power that human has dreamed of.The invisible devices have recently been successfully made by
Li-Mg-N-H体系储氢材料因具有质量储氢密度大,热力学性能适中,可逆性良好等优点,成为目前具有良好应用前景的车载氢源系统的候选储氢材料之一,因此,对Li-Mg-N-H材料在储氢系
通过机械球磨法制备了2LiBH4-MgH2-MoS2复合材料,并研究了MoS2作为一种添加剂对于2LiBH4-MgH2体系储氢性能的影响及相应机理.由TG-DSC与MS测试结果可知,与纯2LiBH4-MgH2相比,
Semiconductor photocatalysis, particularly using visible light, offers promising applications such as fuel production via hydrogen generation, and water and air
会议
Semiconductor quantum structures have not only enabled discoveries of new phenomena but also realizations of novel photonic devices.In this presentation I will
会议
Spin excitation and manipulation with ultrafast optical pulses have been proposed and demonstrated successfully in various magnetic structures, which shows impo
会议
A number of characteristic spectral absorption features of organic molecules have been observed in terahertz (THz) region, and they are thought related to skele
会议
本文采用原位合成的方法制备了具有三元核壳结构的Ag@Co@Ni催化剂.这种三元核壳结构的核心是晶态的银,内外两层壳分别为非晶态的钴和镍.双层核壳的厚度随着钴镍含量的不同而