Reduction of Cr during Smelting Treatment of Stainless Steel Dust

来源 :第十届中国钢铁年会暨第六届宝钢学术年会 | 被引量 : 0次 | 上传用户:dragoenix
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Staniless steel dust contains a remarkable content of Cr oxides which is worthrecycling.As a practical method,Smelting treatment is chosen to recover Cr resource in stainless steel dust.Distribution of Cr between the recovered melt and the residual slag phase depends on the activity coefficient of Cr in the metal phase(Cr γ)and the activity coefficient of CrO in the slag(CrO γ).Bothγ Cr inFe-Cr-Ni-C(-Si/Al)melt and γ CrO in CaO-SiO2-MgO-Al2O3 slag under different situations were firstlypredicted through thermodynamic calculation.Experimental research on reduction of Cr during smelting treatment of stainless steel dust was performed in this study.Theresults suggested that the recovery ratios of valuable metals increased with increasing%CaO/%SiO2 of the residual slag to 1.17 and then decreased.A good linear relationship betweenthe apparent distribution ratio of Cr(m/s LCr)and CrO Cr γ/γ was observed.
其他文献
  Automatic quality monitoring for steel plate is a typical challenge in industries.Although there have been several research results at home and abroad,the r
会议
  辊间压扁理论是板形控制理论的重要组成部分,针对半无限体模型在计算辊间压扁时的误差问题,给出一种计算辊间压扁的新模型。该模型将轧辊视为有限长度的半无限体,基于边界积
  通过冷轧生产时,表面粗糙度数据对比分析,得出不同变形率、润滑条件、轧辊毛化方式及辊面粗糙度均匀条件下,对应的带钢表面粗糙度情况,摸索出最佳的工艺路线和工艺参数组合,在
  采用Gleeble-1500 热模拟试验机,通过金相显微镜、扫描电镜观察及硬度测试,研究了ZWZ12 轴承钢在900 °C 变形50%之后的连续冷却相变规律.结果表明,ZWZ12 钢连续冷却转变
会议
  本文采用湖南贫锰矿为主要原料,在高温碳管炉内进行锰矿含碳团块高温熔融自还原试验,试验温度控制在1550~1650℃,对影响团块还原度的主要因素进行分析,并对还原过程中金属
会议
  Advanced high strength steel(AHSS)iswidely used in the automotive industry because of its advantages for weight reduction and for the resulting improvement
会议
  The precipitation hardened steel 10Ni3MnCuAl after solution heat treatment and aging at 510 ℃ is investigated by transmission electron microscopy(TEM)and t
会议
背景:肿瘤坏死因子(TNF-α)在调节神经炎症方面是一个重要的促炎症因子。在各种神经退行性疾病中,例如阿尔茨海默病(即老年痴呆症)和帕金森氏病中可以看到TNF-的上调。然而,TN
  宝钢三烧结主排风机采用了交直交电流型变频起动装置,由一套变频起动装置分别起动两台主排风机。变频起动装置从静止开始加速主排风机,当加速到同步速后,通过同步并网调整后
会议
自然条件下,植物生长在开放的环境中,经常会遭遇到环境条件的剧烈变化,其幅度超过了适于植物正常生命活动的范围,比如低温,高温,干旱,水涝,盐碱,大气污染,水质污染等,这些不良因素作用于