Life Cycle Modeling of Concrete Bridge DesignComparison of Engineered Cementitious Composite Link Sl

来源 :中国混凝土与水泥制品协会纤维混凝土工程材料2012高峰论坛 | 被引量 : 0次 | 上传用户:liuyantong7
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Concrete infrastructure represents an enormous investment of materials,energy,and capital,and results in significant enviromental burdens and social costs.There is an ongoing effort to identify material alternatives to conventional concrete.Life cycle assessment (LCA) is an important tool to evaluate the environmental performance of alternative infrastructure materials and systems.Here,we present a comparative LCA of two bridge deck systems over a 60 year service life:one using conventional steel expansion joints and the other based on a link slab design using a concrete alternative,engineered cementitious composites (ECC).The ECC link slab design is expected to extend the bridge deck service life and reduce maintenance activities.A life cycle model was developed that accounts for materials production and distribution,construction and maintenance processes,construction-related traffic congestion,and end-of-life management.Results indicate that the ECC bridge deck system has significant advantages in environmental performance:40% less life cycle energy consumption,50% less solid waste generation,and 38% less raw material consumption.Construction related traffic congestion is the greatest contributor to most life cycle impact categories.
其他文献
提出地下工程围岩应变施加水平的计算方法,应用于获取现场岩石的各级初始应变值,确定应力松弛区间.实测泥质粉细砂岩的应力松弛曲线并对其进行阶段划分,以西原模型拟合得到应
研究了乙烯聚合引发剂叔丁基过氧化苯甲酸酯中二叔丁基过氧化物含量的气相色谱分析方法.对气相色谱分析条件进样口温度、载气类型、载气流量、柱升温程序等进行了探索,并对普
本文建立了一种采用毛细管气相色谱法测定环氧丙烷产物中各组分含量的分析方法.实验表明:以FFAP石英毛细管柱为分析柱,用氢火焰离子化检测器(FID)检测,面积归一化法和内标法
在颗粒流程序PFC2D中实现了真实粗糙节理剖面的生成并模拟了直剪试验条件下的剪切力学特性.数值模拟试验和物理模拟试验结果较为吻合,说明能够用PFC2D数值模拟试验部分替代室
本文建立了一种快速分析非甲烷总烃的气相色谱方法,仪器配置一个十通阀实现进样和反吹,检测器为FID,一次进样就可以得到非甲烷总烃的总量,同时避免了O2的干扰峰,并且还可以对
本文论述了一种采用毛细管气相色谱柱切割反吹技术分析裂解气中微量氧化物的方法.通过对阀切换时间、辅助气压力、分流比的考察,确立了最佳测定条件.利用Agilent PCM压力控制
会议
会议
本文从计算机的硬件,系统软件,编程技术的角度,描述了仿真技术的发展,并重点描述现在的仿真技术的特点,着重描述了图形化的建模和面向对象的编程技术。
随着三代核电的发展,对全范围培训用模拟机的需求增加,如何适应核电特点、制定合理的技术方案,成为摆在模拟机技术研究者面前的课题。本文总结了国际上核电模拟机技术发展的