【摘 要】
:
The Cu-coated nano SiC composite particles were prepared by heterogeneous nucleation method.For the heterogeneous nucleation process,the dispersed nano SiC particles and the active Cu2O precipitation
【机 构】
:
National Key Laboratory for Remanufacturing,Academy of Armored Forces Engineering,Beijing 100072,Chi
【出 处】
:
Fifth International Conference on Surface Engineering(第五届表面工
论文部分内容阅读
The Cu-coated nano SiC composite particles were prepared by heterogeneous nucleation method.For the heterogeneous nucleation process,the dispersed nano SiC particles and the active Cu2O precipitation were both prefabricated.The composite particles were characterized by means of XRD,SEM,EDS,TEM and ED analysis technics.It is found that the Cu layer were coated on the nano SiC particles,which is continuous anddense,is partly oxidized to Cu2O,and the oxidation rate can be reduced by improving experimental processes.
其他文献
Development and optimizing of friction material formula,oriented to improve the survice life and security of brake disk,is largely based on advanced measurement method to accurately provide the fricti
High temperature tribological behaviors of nano-Al2O3 in the different base oils were tested with SRV machine.The results show that nano-Al2O3 can obviously improve friction-reducing property of miner
Initial attachment and spreading of the inoculated ceils determines the long-time viability of colls onto biomedical scaffolds designed for various orthopedic or other clinical applications.The aim of
Vertical deposition technique to fabricate thin film solid artificial opals is becoming widely used.In present work,we report on solvent modification and its effect on the arrangement of SiO2 colloida
The novel coronary molecule with multiple functional groups was prepared,and then homogeneous self-assembled monolayers were fabricated successfully from the coronary molecule.A combination of ellipso
A room temperature fast curing epoxy resin nano-adhesive were prepared and modified by nano-SiO2 and liquid rubber CTBN.It has good shear strength value and heat-durability and also meets the conditio
The rapid development of microelectronics has made an ever-increasing demand for new materials and methods for microlithographic applications.The primary step of the microlithographic process is the d
Although various techniques have been employed for depositing bioceramic coatings on metallic implants,the poor coatings/substrate adherence and the long-term stability are still questionable.Based on
The low temperature ion sulfuration technology was utilized to treat the 52100 steel in order to improve its wear-resistance and anti-scuffing property.A stable sulfide solid lubrication layer of FeS
The forces associated with the surface limits the lifetime and repeatability of operation of MEMS as well as the capacity of the magnetic disk storage.Self-assembled monolayers (SAMs) is considered to