论文部分内容阅读
Optical components in large aperture optical imaging system and high power laser optics are susceptive to intense laser radiation.
Imaging performance degradation of scanning laser damaged optical band pass filter
【摘 要】
：
Optical components in large aperture optical imaging system and high power laser optics are susceptive to intense laser radiation.
【机 构】
：
State Key Laboratory of Laser Interaction with Matter, Northwest Institute of Nuclear Technology, P.
【出 处】
：
LIMIS 2016——The 4th International Symposium on Laser Interac
【发表日期】
：
2016年8期
其他文献
When laser interacts with semiconductor,such as laser processing,laser-induced surface melting and liquid-state diffusion of dopant atoms occurs.
Considered the pyrolysis and the internal gas convection,a three-dimensional mathematical model based on the conservation of energy,had been developed for predicting the pyrolysis behavior of composit
The mechanisms of laser-induced damage on semiconductor are of great importance to the fields of laser annealing,laser induced damage of photoelectric devices,laser-induced film deposition,etc.
Transient radiation such as gamma or X ray generally degrades the performance of semiconductor devices and circuits.Tradiational methods to study their characteristics under irradiation rely on giant
Meso-Scale Simulation of Temperature Field in Composite Materials under Laser Irradiation with Diffe
Accurate solution of temperature field in composite materials is very important to analyze its laser irradiation effects.
The polymer to ceramic transformation process enabled significant technological breakthroughs in ceramic science and technology,This process offers the means for the design of ceramic microstructures
Laser intensity influence on the carbon film deposited by ultrafast laser ablation of highly oriente
Highly oriented pyrolytic graphite (HOPG) is ablated by ultrashort laser pulses with different pulse durations (50 fs and 4 ps) and laser fluences (68 J/cm2 and 34 J/cm2) in vacuum (4× 10-4 Pa).
Polyurethane-based black coating is a kind of gloss and flat paint used for stray light shielding in optical imaging systems.It has been reported that the deposition of heat generated by laser changes
In this research,we collected typical some UV fused silica materials,and built outer focusing method with high energy to test bulk damage thresholds of all the samples.
To investigate the influence of initial temperature on the laser ablation impulse coupling coefficient,an experimental setup was established with micro impulse responsibility of μNs level.