Morphological influence of molybdenum disulfide nanoparticles on powder lubrication and photo cataly

来源 :2012中国国际粉体技术与应用论坛暨全国粉体技术产品商贸交流会 | 被引量 : 0次 | 上传用户:WSLBCW
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The tribological and photocatalytic properties of two kinds of nano-MoS2,namely nano-sphere and nano-platelet,were investigated.The results showed that MoS2 nano-spheres could not work in the powder-lubrication manner,whereas MoS2 nano-platelets represented a stable lubricating performance.Moreover,MoS2 nano-platelets also revealed a better catalytic activity in the degradation reaction of malachite green as compared to MoS2 nano-spheres.The amount of nano-spheres with a low BET area in the contact area was not enough to lubricate the steel friction pair.However,MoS2 nano-platelets with a high BET area could well function as a powder lubricant.MoS2 nano-spheres with a layer-closed structure only provided the basal surface,whereas MoS2 nano-platelets offered the active rim-edge surface in the catalytic degradation of malachite green.Moreover,the high BET area also improved the catalytic activity of MoS2 nano-platelets.Thus,the nano-platelets revealed higher catalytic activity than the nano-spheres.The findings indicated MoS2 nano-platelets have potential applications in powder lubrication and photocatalysis.
其他文献
  弧齿锥齿轮的测量采用两种方式:其一是单项几何精度的测量,主要是齿面的三维拓扑测量,同时包括齿距误差、相对齿形误差、相对齿向误差等项目的测量。这种测量作为预防测量和
  根据华电国际邹县发电厂1000MW超超临界汽轮机无高排逆止门和一级大旁路的特点,详细介绍了汽轮机的高压缸预暖投入、旁路系统投入、阀门室预暖投入、汽轮机冲转步骤、并网
  经济运行不仅可以降低生产成本,提高企业的经济效益,同时节约能源,减少环境污染。由于供热机组是热电联合能量生产,它具有与凝汽机组不同的特点,因此,供热机组经济性的影响因素
  通过改进喷溅装置,改善冷却塔布水的均匀性,提高冷却塔换热效率,降低冷却塔出水温度,导致凝汽器真空提高,机组发电能力增强。
  连铸保护渣是钢铁冶金中要求最为苛刻的渣系之一,对铸坯表面质量和连铸顺行具有重要影响。本文综述了目前连铸保护渣主要基础渣系CaO-SiO2熔体结构特征研究状况,并通过分子
  由于传统的CaO-SiO2基保护渣浇注高铝钢的过程存在反应性问题导致连铸过程性能不稳定,获得铸坯质量差,学者提出了CaO-Al2O3基保护渣。研究发现CaO-Al2O3渣系保护渣能够改
  随着现代高科技发展和机械精度迅速提高,温度对机械精度的影响愈来愈大,热误差在精密工程和微纳米测量技术中占到总误差的50%以上,已成为机械学科前沿领域的研究热点之一,世
  本文对实验室新开发20Mn23AlV钢的高Al2O3、低SiO2含量保护渣进行了高温静态相平试验,模拟研究浇铸前后该保护渣主要化学成分及性能的变化;并与现用两种保护渣使用情况进行
La2Mo2O9 nanocrystallites were synthesized successfully using Sol-gel process with (NH4)6Mo7O24·4H2O,La(NO3)3·6H2O,citric acid and PEG400 as original material
Co(1-x)NixFe2O4 nanoparticles were synthesized by a sol—gel method and then the core-shell structure Co(1-x)NixFe2O4/polypyrrole nanocomposites, where the