The Simulation Analysis Method about the Door Open Quality Based on Adams

来源 :第19届亚太汽车工程年会暨2017中国汽车工程学会年会 | 被引量 : 0次 | 上传用户:woshigezuiren
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Handling the latch,hand shank and the door system of vehicle model based on Adams,establish the operation door mathematical model.Making the force of operate latch,the smoothness and the door open sound quality as the research standard values,establish the door open force simulation analysis method which can apply to the door operation quality design and optimization and also have important guiding significance on the operation quality.
其他文献
When the road surface adhesion coefficient is low,the tire cornering force exhibits strong nonlinearity.In this situation,the general 2DOF(degree-of-freedom)vehicle model is deviated from the actual v
There are big differences for the side crash test between 2018CNCAP and 2015CNCAP.For the mass and the impact po-sition of the barrier are redefined,thus the intrusion displacement and velocity of the
This paper analyzes the nonlinear characteristics of air spring and damping characteristics of shock absorber at first.Two DOF vehicle dynamics model is established based on a quarter air suspension a
The method to simulate the low-frequency road noise to 100Hz is presented,and the measured road surface is used for input for the simulation.The transfer path analysis and panel contribution analysis
针对商用车车架的弯曲、扭转以及疲劳试验设计一种专用的试验系统,该试验系统一方面可以实现对车架的弯曲强度和扭转强度的测试;另一方面,其采用电测设备采集易破坏部位的应变-应力谱,通过应变-应力谱计算出不同试验次数对车架造成的疲劳损伤,并且在车架满足疲劳寿命时通过MINER疲劳寿命理论在INFIELD软件中计算出该型车架的疲劳寿命,进而换算出行驶里程,为设计人员提供数据支撑.
From the perspective of emulating human drivers predictions,a novel cascade controller for curve driving is provided to realize automatic steering based on trajectory prediction.On the basis of road e
根据中国智能交通产业联盟(C-ITS)发布的《合作式智能运输系统车用通信系统应用层及应用数据交互标准》,深入研究了车与车协同驾驶主动安全相关的紧急制动预警(EBW)的应用场景,结合北京汽车厂自身特点及人因工程特征提出了把制动信号分为制动预警信号、常规制动信号和紧急制动信号三种,并给出了通过采集制动踏板行程距离获取包含制动加速度的制动信号.通过专用短程通信(DSRC)技术,分等级制动预警信号的提示,
This paper makes road test on two kinds of engine lubricant,one contains nano-ceramic additives,and one does not.Results show that the lubricant containing nano-ceramic additives can fully meet the re
this paper domestic based oil and additives were chosen according to the working characteristics of heavy duty and super-charged diesel basing on a lot of tests.The nyctinasty of compound additive pro
The achieved factor analysis of vehicle DTS(dimension tolerance specification)is complex.In this paper,a new method combined with 3DCS modeling analysis is put forward,translates the actual measured d