Weft insertion by air-jet loom is a complicated movement, which is not a fully controlled technological process.In this type of loom, freedom of the filling to untwist during insertion results in twis
The loose soils from mountainsides may cause mudslides after the occurrence of torrential rains or typhoons.Mudslides cause heavy treasury loss and wound-and-death tolls;therefore, studies on effectiv
Hairiness is one the most important parameters affecting all the latest process after spinning.Hairiness more than desired and appropriate value causes a lot of difficulty in all the further process.M
when observing a relation between beat-up force and warp tension by using computer analysis program, as a result of analyzing after giving warp tension variation by gradually increasing tensile streng
There have been growing interests in needleless electrospinning, as an alternative method of needle electrospinning.Generally, needleless electrospun fibers have relatively larger and less even diamet
This study surveys the weavability of technical fabrics according to the fabric cover factor and loom characteristics such as weaving speed, shedding angle and setting warp tension using aramid filame
Low-temperature pyrolysis was conducted to remove jute fibers non-cellulosic compounds, which mainly have undesirable hydrophilic nature of jute fibers for reinforcement application.
This paper investigates the physical properties of 100% micro modal yams and its knitted fabrics spun by ring, siro spun, compact and air vortex spinning machines.
The composite spun yarns consisting of core filament and staple fibers on the surface have typically used in multifunctional purposes such as high tenacity, skin-friendly surface, thermal insulation a