【摘 要】
：
In this paper, A1 rod lead alloy/β-PbO2 composite anode was prepared on aluminum rod lead alloy by drawing-extrusion composite β-PbO2 particals.After 36h galvanostatic polarization at the current dens
【机 构】
：
Faculty of Metallurgical and Energy Engineering,Kunming University of Science and Technology,Kunming
【出 处】
：
The 6th International Conference on Hydrometallurgy(第六届国际湿法冶
论文部分内容阅读
In this paper, A1 rod lead alloy/β-PbO2 composite anode was prepared on aluminum rod lead alloy by drawing-extrusion composite β-PbO2 particals.After 36h galvanostatic polarization at the current density of 500A/m2 in a synthetic zinc electrowinning electrolyte of 50 g/L Zn2+, 150 g/L H2SO4, 0.5 g/L C1-at 35 C, A1 rod lead alloy/β-PbO2 composite anode and A1 rod lead alloy anode were investigated using anodic polarization curves, cyclic voltammetry curves and electrochemical impedance spectroscopy techniques, and the phase composition and microscopic morphology of the anodic oxide layers were observed by X-ray diffraction and scanning electron microscopy,respectively.
其他文献
监测力学试验设备使用全生命周期的稳定性对于保证测量结果的可靠性至关重要,大批量制作的有相同标称值的无时效力学标样是监测力学试验设备长期稳定性和评估设备系统偏差的有效工具.
为了分析PC钢绞线拉伸性能不合原因,采用扫描电镜、金相显微镜和电子探针配合波谱仪对断裂试样进行了断口观察、纵截面裂纹和组织分析、横截面碳元素面分析.分析结果表明:造成PC钢绞线拉伸试验性能不合原因是试样心部存在网状渗碳体,在拉拔过程中形成人字形裂口,裂口不断扩展,造成钢绞线未达到额定的最大力即发生提前断裂.
电池壳表面微小点缺陷特别是疑似"砂眼"缺陷已成为制约其产品质量的最重要因素.运用扫描电镜、光学显微镜、聚焦离子束等电子显微法和电解酸蚀法等电化学方法对电池壳表面常见的几类典型点缺陷表面、截面进行失效分析.
采用SE(B)试样进行KIC试验,通过金属材料平面应变断裂韧度方法中的GB/T4161-2007和TB/T 3276-2011两种标准辨别KQ的有效性,并对比分析两种标准在KQ有效性判定上的不同.
W and Mo existed in the form of peroxytungstic acid(H4W4Ol2(O2)2) and peroxymolybdic acid (H4Mo4O12(O2)2) in the presence of H2O2, since the chelating effect of H2O2retard the formation of isopolyions
Selective acid Leach and beneficiation process was carried out to recover gallium from slag containing gallium.The experiment results of acid leaching tests showed that the leaching rate of Ga, A1 and
At present, lithium air battery has attracted a great deal of attention because of its higher theoretical energy density than all other battery types.In a lithium air battery, catalysts, such as trans
The neodymium oxalate and neodymium oxide with large particle size was prepared in present study.Precipitate formation of neodymiumn oxalate was obtained in P507-N235-kerosene-cyclohexane system.
Selective acid Leaching and beneficiation process was carried out to recover gallium from gallium-containing slag.The experiment results of acid leaching tests showed that the leaching rate of Ga, A1
Agglomeration is a process that a number of particles adhere together to form an agglomerate, and is generally divided into two or three steps: encounter and association between particles, consolidati