【摘 要】
：
In this paper,the simulation platform for the inter-functional testing of vehicular electronic control units(ECUs)is built by taking into consideration the characteristics of the diversification of th
【机 构】
：
China Automotive Technology and Research Center
【出 处】
：
第19届亚太汽车工程年会暨2017中国汽车工程学会年会
论文部分内容阅读
In this paper,the simulation platform for the inter-functional testing of vehicular electronic control units(ECUs)is built by taking into consideration the characteristics of the diversification of the ECU functions,the complexity of the inter-functional behav-iours,the concealment of the design flaws,and the severity of the consequence of a failure.Firstly,by adopting the model-based design approach,the vehicular sub-systems are modelled in detail to fully support the design,development,testing,and evaluation of the ECUs.
其他文献
本文基于某1.0L汽油机,分别在起燃稳态与冷起动瞬态工况下,研究了VCM技术对燃烧状态及颗粒物排放的影响效果.结果表明,首次喷油相位与喷油压力为起燃工况下对颗粒物排放最为明显的两项影响因素,其中,首次喷油相位由于采用VCM加强了缸内湍动能得以推迟,使燃油着壁量减少,有效降低了PM与PN排放.在冷起动瞬态工况下,起始加浓控制阶段,通过采用VCM技术,发动机最大瞬态HC排放被降低29％,累积HC排放被
With the Limits and Measurement Methods for Emissions from Light-duty Vehicles(CHINA 6)issued, the OEMs need to meet the new legislation in Chinese market in the future. For cost-sensitive market segm
Model-Based Development(MBD)is an increasing popular development method in engine control fields. What s more, Matlab SimulinkTM is a most universal kit for MBD. Faced with more and more strict emissi
In this work, we document the influence of variable valve timing on performance of a turbocharged gasoline direct injec- tion(TGDI)1. 0-liter 3-cylinder engine under conditions of different loads at d
In this work, the investigation of the influence of fuel injection timing and fuel pressure on particle emission performance of two turbocharged gasoline direct injection(TGDI)engines in the condition
The piston ring packs contribute up to 25%of the total mechanical engine friction loss, and a corresponding fuel con- sumption of up to 4%. Coating technology is one of the effective ways to reduce th
We document the influence of different intake port designs with different tumble ratio on performance, combustion char- acteristics and exhaust emissions of a turbocharged gasoline direct injection(TG
This paper has introduced the achievements of a China Fifth Stage Emission Standard(CN5)in use gasoline vehicle meeting the requirements of California LEV Ⅲ stage Ultra-Low Emission Vehicle 70(ULEV 70
In this work,to improve the platooning dynamics,a novel platooning control method is proposed which is realized by taking account of the individual vehicle dynamics in the platooning control decision.
In recent years,driverless vehicle technology receives more attention because of its excellent performance on safety and efficiency.