提高工艺编织纸水性色浆留着率的研究

来源 :2016全国特种纸技术交流会暨特种纸委员会第十一届年会 | 被引量 : 0次 | 上传用户:an123
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
对比硫酸铝、阳离子淀粉、阳离子聚丙烯酰胺和一种聚胺类固着剂对工艺纸水性色浆留着的影响,并综合考虑纸张的吸水性和湿强性能两项重要指标,得出该聚胺类固着剂对水性色浆留着率最高,△E可达到10.46,△a可达到6.25,且使用量最少,对纸张的吸水性影响最小,表面吸收速度为409 s,湿强性能也较好,湿抗张指数达到9.23 N·m/g.
其他文献
Auctions are believed to be effective methods to solve the problem of wireless spectrum allocation.Existing spectrum auction mechanisms are all centralized and suffer from several critical drawbacks o
In traditional studies,updating rule usually plays an important role in the research of opinion formation.In this work, we propose an opinion dynamics model based on Bayesian updating rule.More detail
针对超声成像测井中由于各种不确定因素而导致测井图像中出现带状异常区域的现象,通过分析目前修复异常区域所采用的常规方法尤其是小波域修复方法的不足,提出一种能够有效解决此类问题的全变分二范数有限差分小波域超声测井图像修正算法.首先,设计基于图像基于相邻行相关值与绝对误差值相结合的"链条"异常区域自动识别算法,实现对异常区域的准确定位.随后针对全变分小波域图像修复过程中出现的"分片常数"效应,设计一种全
The ISO/IEC/IEEE 21451 standards provide the communication and information models to facilitate access of smart sensor to a network.ISO/IEC/IEEE 21451-1-4 standard aims to propose a solution using Ext
This paper presents a low power 10 bit 2.5MS/s successive approximation register (SAR) analog to digital converter (ADC) design for intelligent signal process system of micro controller unit (MCU) in
The problem of finding a better immunization strategy for controlling the spreading of the epidemic with limited resources has attracted much attention since its great theoretical significance and wid
智能电网的安全问题己引起越来越多研究者的重视,本文对新兴的坏数据注入攻击进行了探讨,该攻击通过篡改传感数据对电力系统进行欺骗,造成不可预估的损失.对于这种攻击,本文提出一种加密方案,即以簇粒度为分界线的两层认证机制,其中簇内认证密钥加密采用生成树分担数据聚集任务的方式,以节点拓扑编号为密钥计算标准,结合同态加密的对称算法进行拓扑遍历聚合数据;簇间的认证采用密钥基于内容生成的方式进行对称加密认证,同
Underwater Acoustic Local Area Networks (UA-LANs) can be used to improve the coverage of an underwater network by introducing a tier of local-area communications.Media Access Control (MAC) is a crucia
Stepped-frequency waveforms (SFWs) can use the digital signal processing method to obtain high range resolution with relatively narrow instantaneous bandwidth, which have been used in synthetic apertu
本文分别对粗滤、自然沉降以及絮凝预处理三种预处理方法进行了对比,结果显示絮凝预处理后的废水CODcr及SS的去除率明显高于其他两种预处理方式;进而对预处理过程中絮凝过程的影响因素(絮凝剂种类、絮凝剂用量、温度等)进行了系统的优化.在膜分离的过程中,采用孔径为1.4μm、0.8μm、0.2μm、50 nm及20 nm的陶瓷膜进行了分离特性研究,结果表明孔径较小的20 nm膜不仅具有较为稳定的通量,且