【摘 要】
:
The purpose of this study is to examine technology leadership competency levels of secondary school principals in poverty-stricken areas of China.The survey method design was employed for the study.Th
【机 构】
:
Department of Educational Communication and Technology,East China Normal University
【出 处】
:
第22届全球华人计算机教育应用大会
论文部分内容阅读
The purpose of this study is to examine technology leadership competency levels of secondary school principals in poverty-stricken areas of China.The survey method design was employed for the study.The sample consisted of 1214 teachers from ten different middle schools in Shangrao,Jiangxi province.The technology leadership competency scale was used as a data gathering tool.Confirmatory factor analysis,independent samples t-test and one-way ANOVA were used as statistical methods.The analyses showed that technology leadership competencies of middle school principals in poor areas of China were found to be high.The results also showed that there were significant differences in the scores of technology leadership competency and its sub dimensions according to teachers attitudes towards ICT and ICT use frequency of teachers.Besides,the study also found five major problems faced by the principal in implementing technical leadership.
其他文献
ZA81M是一种具有优良强韧性的多元微合金化新型镁合金.利用Gleeble 3800热模拟试验机研究了ZA81M镁合金在温度为200℃~350℃和应变速率为0.001s-1-1s-1范围内的热变形行为,获得了该合金在上述变形条件下的流变应力-应变曲线,以动态材料模型为基础建立了ZA81M镁合金的热加工图.研究表明,合金的流变应力-应变曲线具有明显的动态再结晶特征,且流变应力随着应变速率的增加而增大
利用真空电弧炉制备NixAlTiCrFeCoCu(各元素原子百分比为x∶1∶1∶1∶1∶1∶1,x=0.5、1.0、1.5、2.0、2.5、3.0)高熵合金,研究铸态合金的显微组织与性能.结果表明,NixAlTiCrFeCoCu系列高熵合金的显微组织主要由具有面心立方结构(FCC)的固溶体和体心立方结构(BCC)的固溶体组成.合金组织主要有花瓣状组织、菊花状组织、富Cu的晶间组织和富Ni相;菊花状
以薄壁镁合金方管为研究对象,采用Deform有限元软件对其挤压过程进行稳态模拟,分析模具内金属的速度场、应变场以及温度场。分析型材出口位置流速的分布不均匀性并改进初始模具结构,在方管中心加强筋位置,增加模具出口尺寸,流速增加,整体的金属流速更为均匀。有效解决了挤压过程中金属分布不均匀的问题,改进后的模具模拟结果符合实际挤压要求。
通过对含Cu低碳钢进行热模拟实验,利用形变强化和析出强化的整合作用,使含铜钢得以强化。运用正交实验法进行实验设计,在Gleeble-1500D热模拟机上完成热压缩实验,利用扫描电子显微镜观察合铜钢的显微组织形貌,并进行能谱分析。借助显微硬度计测试了实验钢的硬度,通过方差分析得出了变形温度、变形量和变形速率对实验钢硬化效果的影响规律。结果表明,含铜钢的强化效果与变形温度、变形量、变形速率有关,三因素
采用电子束焊接Ti60钛合金,并利用残余应力测试仪和有限元分析方法测试和模拟焊后残余应力值。通过测试和模拟焊前预热、焊后缓冷和焊前预热焊后缓冷三种焊接工艺下的残余应力值,研究其残余应力分布规律。研究结果表明,在垂直焊缝截面上,纵向残余应力σx的数值模拟结果与实验测试结果在变化趋势上基本一致:在焊缝中心线附近,纵向残余应力σx的数值较大。随着距焊缝中心线距离的增大,纵向残余应力的数值逐渐减小;数值较
This paper reports a case study that is intended to trace the professional growth of a science teacher who is implementing seamless inquiry science learning(SISL)in the context of Singapore primary sc
2017年4月,北京市教委决定实施北京市促进通州区教师素质提升支持计划,联合市财政局印发了《关于促进通州区教师素质提升支持计划(2017-2020年)》(以下简称“支持计划”).为了更好的支持该计划落实,发现教师专业发展的需求,本研究以通州区初中教师全样本数据为例,分析了当下教师专业发展的实际需求,发现教师在对口教学、教研提升、技术应用、个人评价上需求较多.结合数据分析,文章站在教师研修层面提出了
Teachers informationization teaching ability is an important content of the current teacher professional development.Training is one of the ways to promote the teacher professional development.In view
We reviewed 9 articles related to mobile language learning in familiar authentic environments published in SSCI journals.We presented our results and their discussion with respect to the following cat
如今,STEM(科学、科技、工程、数学)教育在K-12基础教育中的推广已经在全球范围掀起热议.其中,人们逐渐对STEM中的「工程」提高了重视,认为工程是将各学科与实际生活结合的枢纽,它能够让学生在动手动脑的同时享受快乐的学习.目前,在香港基础教育学科中促进STEM在教学中的运用存在诸多挑战.其中,老师方面的因素不可忽视.参考之前对当地一家小学老师的访问结果及相关文献,就如何帮助老师提高STEM课程