【摘 要】
:
Flexible and wearable bionics-sensors,as the most exciting frontier in the field of flexible electronics,have attracted more and more attention due to their unique properties (attachable,wearable,and
【机 构】
:
Suzhou Institute of Nanotech and Nano-Bionics,Chinese Academy of Sciences
【出 处】
:
The 8th International Workshop on Innovation and Commerciali
论文部分内容阅读
Flexible and wearable bionics-sensors,as the most exciting frontier in the field of flexible electronics,have attracted more and more attention due to their unique properties (attachable,wearable,and foldable) and potential applications in consumer electronics,homeland security,and health-related equipment etc.Flexible pressure and strain sensors,as part of artificial electronic skins (E-skins),have attracted increasing massive attention due to their unique advantages in potential applications of health monitoring.Monitoring body physiological signals including blood pressure,heart rate,and wrist pulse presents one of the most convenient methods for non-intrusive diagnosis of diseases.However,currently investigation in detecting human physiological signals by flexible pressure sensors is quite rare,and how to improve the flexibility,sensitivity,response time,and stability is still a big challenge.Here we present our recent works on the formation of free-standing Single-walled Carbon Nanotubes (SWNTs) and Functionalized Graphene Oxide (FGO) ultrathin films,and the construction of transparent and flexible E-skins.With the high conductivity of SWNTs/FGO network and micro-patterned PDMS structures,we developed a facile and low-cost method for fabricating highly flexible pressure sensor arrays,and demonstrated that they are ultra-sensitive (detection limit <0.6 Pa) for detection of super-slight forces with short response time (<10 ms) and excellent stability (>50000 cycles).Furthermore we demonstrated their applications as the wearable devices in monitoring human physiological signals.This work may open a novel and facile method for developing nanomaterials-based flexible nanoelectronic sensing devices,and also may broaden their potential use as cost-effective wearable electronics for prevention of illnesses and prediction of early disease.
其他文献
铁及其合金的应用极为广泛,如,医疗器械,加工工具,导线等.但是铁非常活泼,极易被腐蚀,因此,减缓铁的腐蚀成为一个重要的课题.有机物分子在金属表面形成的自组装膜可以在铁的表面与腐蚀介质之间建立起屏障.近年来,很多研究致力于烷硫醇自组装层吸附于诸如金,银,铜的表面[1].相比之下,铁表面自发形成的有序的保护膜却很少被关注.由于铁极易被空气氧化,生成Fe4O3[2],因此,在铁的表面很难形成烷基硫醇自组
铜及其合金是人类应用最早和最广的一种有色金属,由于其优良的导热性能、机械性能和抗污性能,产量仅次于钢和铝而位居第三,同时具有足够的强度、弹性和耐磨性,在国民经济中的应用非常广泛.国内外的发电机组中,大部分的凝汽器都是金属铜及其合金材料;此外在海上军事工程中舰船水管路系统中,大部分使用的也是铜材料,但是铜材料在使用过程中也暴露出来了严重的腐蚀问题,严重的影响了船舰的整体性能的运转,制约了海上军事的发
镀锌的输电杆塔在我国电力输电网中得到了广泛的应用.大气腐蚀为输电杆塔的主要腐蚀形式之一,初步研究表明电力传输过程中高压输电线周围产生的高压电场对输电杆塔的腐蚀有一定的促进作用[1].输电杆塔表面镀锌层的加速腐蚀会导致输电杆塔的提早损坏,造成巨大的经济损失和社会影响.因此研究电场对输电杆塔大气腐蚀的影响具有非常重要的科学意义与经济价值.
管线钢的腐蚀一直是石油化工企业面临的最重要的问题之一,由于所处的内部和外部环境的不同,管线钢会遭受不同的腐蚀,使得管线钢的腐蚀预测难度增加.X70管线钢广泛的应用于石油化工中的石油、天然气运输,而且由于其高韧性、高强度的特点,成为中国"西气东输"工程采用的主要管线钢之一.因此,X70管线钢在腐蚀环境中的腐蚀问题成为当前腐蚀领域的研究热点之一.[1-4]
通过动电位极化曲线、电化学阻抗谱和Mott-Schottky曲线等电化学测量方法,研究了经钝化的加入稀土元素Ce和合金元素Al的不锈钢在质量分数3.5%的NaC1溶液中耐蚀性能与其半导体特性的关系,分析稀土元素Ce和合金元素A1对不锈钢耐蚀性的影响.结果表明,不锈钢钝化膜在负于平带电位范围表现为P型半导体,在高于平带电位范围表现为n型半导体,这主要与组成钝化膜的Fe和Cr氧化物半导体性质有关[1,
以家用抽湿机收集的热带海洋气候的大气冷凝液作为腐蚀研究介质,以自制的丝状Ag/AgCl电极作为参比电极[1],以铂丝为对电极,1cm2 Q235碳钢作为工作电极构成三电极体系(如图1),测试了Q235碳钢在液滴、薄液膜和厚液膜下的开路电位(OCP)、电化学阻抗(EIS),并结合X70管线钢在液滴的腐蚀形貌图片,分析了Q235碳钢的腐蚀过程与机理.
世展科技个人卫生用品(i)Chem-Tech(R) 抗菌祛臭技术全方位呵护 养护抗菌祛臭技术SAP 复合芯体干法纸
With the development of MEMS (Micro-electromechanical systems) technology,the miniaturization of hotplates has become an important trend.Considering the advantages of low energy consumption,fast respo
Some high performance MEMS sensors are introduced in this talk.For the pressure sensors,which are mainly based on SOl technology and special structure,the characteristics of high temperature endurabil
Microelectromechanical systems (MEMS) devices are manufactured using similar microfabrication techniques as those used to create integrated circuits.They often have moving components that allow a phys