论文部分内容阅读
熔融碳酸盐电解制备银耳状多孔碳及储钠性能
【机 构】
：
浙江工业大学材料科学与工程学院,浙江杭州,310014
【出 处】
：
2019第二十次全国电化学大会
【发表日期】
：
2019年3期
其他文献
Precipitation of Cu-rich nano-phases leads to the increase of ductile-brittle transition temperature,which may bring about a substantial threat to the safety of reactor pressure vessel(RPV).To underst
The world needs more low-carbon energy for climate change mitigation.Nuclear power is an attractive alternative on carbon reduction and energy restructuring.There should be a long-term planning for nu
Fusion or thermonuclear power is a promising,literally endless source of energy.Development of fusion power is still in investigation and experimentation phases and the largest fusion experiment devic
Gas Dynamic Trap(GDT)is very attractive as a kind of fusion neutron source for material test and driving transmutation reactor due to its linear and compact structure,easiness of construction and main
The liquid PbLi blanket is one of the most promising blanket concepts for fusion reactors and has been under extensive research in the world.One of key issues in the liquid PbLi blanket is corrosion o
Deutrtium(D)and tritium(T)have long been touted as promising fuels for fusion power production because of their easily burning and available higher energy producing.Given that fusion reactor will cons
Describing geometry of advanced nuclear facility was difficult in Monte Carlo nuclear transport simulation.CAD based Monte Carlo modeling was proposed to facilitate it.Since CAD model usually contains
Depletion calculation is a key step in reactor design and analysis,which evaluates the nuclide components of materials in depletion zones during reactor operation.In Super Monte Carlo Simulation Progr