Effect of Cr2O3 layer on the deuterium permeation properties of Er2O3/Cr2O3 composite coating prepar

来源 :第16届全国氢能会议暨第8届两岸三地氢能研讨会 | 被引量 : 0次 | 上传用户：xuwei800

【摘要】

：

The effect of Cr2O3 layer on the deuterium permeation properties of Er2O3/Cr2O3 composite coating was investigated.Composite coating was prepared on 316L stainless steel by metal organic chemical vapo

【作者】

：

Yunyi Wu Di He Shuai Li Xiaopeng Liu Hua Zhang Shumao Wang Lijun Jiang

【机构】

：

Department of Energy Materials and Technology,General Research Institute for Nonferrous Metals,Beiji

【出处】

：

第16届全国氢能会议暨第8届两岸三地氢能研讨会

【发表日期】

：

2015年10期

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

其他文献

Combined Multiphysics-and Percolation Micro-Models for H+SOFCs with H+-O2--e-mixed conducting cathod

It is well known that the typical H+-SOFC composite cathodes with e-,H+,O2-mixed conducting characteristics show very different functional requirements from the conventional O2--SOFC composite cathode

会议

Synergistic Effect of LaNi and TiH2 on Thermal Storage Properties of Mg

The effect of LaNi and Ti on the thermal storage properties of MgH2 was investigated for the first time.The thermal storage performances of Mg were significantly improved by adding LaNi and Ti simulta

会议

magnesiumthermal storagekinetics performancethermodynamics performance

高性能阻醇质子交换膜内多级自组装质子传输通道的构筑

直接甲醇燃料电池(DMFC)是一种新型的能源转换装置,它以其体积小,能量密度大,尤其是燃料的易储存、运输等优点使其在便携式电源领域中具有良好的应用前景[1,2].

会议

PEMFC金属双极板流道模板电解加工的试验研究与分析

随着燃料电池微型化的发展趋势，金属材料所制成的双极板成为未来双极板发展的主要方向。以加工多通道蛇形流道为例，提出采用模板电解法加工金属双极板上的微流道结构。建立模板电解加工的理论数学模型，并利用有限元软件对模板电解加工微流道的成形过程进行模拟，研究加载电压对模板电解加工过程中阴阳极表面电场分布的影响。

会议

模板电解微流道金属双极板电场模拟

Effect of deposition temperature on microstructure of ScSZ coating deposited by vacuum cold spray

ScSZ(Sc2O3-stabiized ZrO2)has been extensively used as an electrolyte in solid oxide fuel cell(SOFC),due to its higher electrical conductivity in relatively low temperature(600-800℃).

会议

ScSZmicrostructurevacuum cold spraydeposition temperature

金屬發泡材流道應用於高溫質子交換膜燃料電池

本研究探討使用金屬發泡材為流道之高溫型質子交換膜燃料電池之性能特性。高溫質子交換膜為Advent TPS(R)膜，比較兩種不同的流道分別是傳統單蛇與金屬發泡材流道之性能差異。並探討在不同操作溫度、燃料當量比與加濕條件下之電池性能表現。同時以交流阻抗分析法研究電池在不同操作條件下之阻抗，以探討相關電化學機制。

会议

排水口布置和流道壁面属性对质子交换膜燃料电池阴极流道水传输影响的数值分析

Water motions in simplified,straight cathode channels are investigated numerically to study the dynamics of water in a proton exchange membrane(PEM)fuel cell.

会议

water motiongravitywettabilitysurface tension

The microstructure stability of atmospheric plasma sprayed Mn1.5Co1.5O4 coating under H2 and air env

Interconnect(IC)is a key component for construction of SOFC stacks; it electrically connects the anode of one cell to the cathode of another while physically separating the fuel from the oxidant gas.

会议

The Application of Warm-Hot Gas Desulfurization Technology into SOFC Field by Iron-Based Sorbents

In this study,we introduce iron-based sorbents(20%-Fe2O3/SiO2,20%-FeSi),synthesized by impregnation method,into a simulated syngas environment(30%CO,5%CO2,10%H2,1%H2S with N2 for balance)to investigat

会议

Solid oxide fuel cell (SOFC)warm-hot gas desulfurization (WHGD)sorbentsulfur

A New Method to Estimate the Leakage Current in a Solid Oxide Fuel Cell with a Mixed Ionic and Elect

Ceria based material is a promising electrolyte for intermediate temperature solid oxide fuel cell(SOFC)thanks to its high ionic conductivity and good chemical compatibility with traditional electrode

会议

Effect of Cr2O3 layer on the deuterium permeation properties of Er2O3/Cr2O3 composite coating prepar

与本文相关的学术论文