An Evaluation of the Effectiveness of Novel Industrial By-products and Organic Wastes on Heavy Metal

来源 :The 12th International Symposium on East Asian Recycling Tec | 被引量 : 0次 | 上传用户:jj806778025
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  The in situ immobilization of heavy metals using various easily obtainable amendments is a cost-effective and practical method in the remediation of contaminated sites.
其他文献
Recovery of cadmium in water was investigated by an electrochemical deposition approach in a multi-anodes and multi-cathodes cell in this study.The effects of initial pH(1.5,3.5,5.5 and 7.5)and curren
For comparison of different water-to-solid ratio for the accelerated carbonation of municipal solid waste incinerator(MSWI)bottom ash for CO2 capture,it is necessary to understand the morphological ch
"In situ" soil remediation technology has becomes increasingly important.In this study,effect of saturated or unsaturated flow for solid washing was evaluated using ion exchange model and one dimensio
A novel carbonaceous heavy metal adsorbent was prepared from heavy oil ash using sulfur impregnation with K2S,and its removal ability of lead from aqueous solution was examined.
会议
The zinc residue was the by-product from zinc hydrometallurgical process.It was the purpose to study the feasibility at laboratory-scale of a hydrometallurgical routine for the recovery of zinc from h
The main aim of this study was to separate heave metals and yield crude bio-oil from a heavy metals hyperaccumulator harvest,Pteris vittata,through hydrothermal upgrading process.
Zinc recovery form zinc calcine containing high content of iron by selective reduction roasting was investigated.Zinc oxide was separated from franklinite to upgrade soluble zinc during the reduction
Heavy-metal-containing neutralization sludge(NS)and zinc leaching residue(ZLR)are difficult to dispose,both of which two main solid wastes are produced in Pb/Zn smelting process.
The use of mechanical ball milling for the solidification of arsenic-containing fly ash was investigated in the present study.The leaching concentration of fly ash before and after treatment was analy
It was suggested by results of thermal calculation that the zinc ferrite should be selectively reduced into magnetite,instead of ferrous oxide(FeO),to keep the iron from being extracted.