【摘 要】
：
Biogas can be used as an alternative energy source for producing heat and electricity;however,volatile methylsiloxanes (VOSiC) present in biogas can severely damage heat exchangers,turbines and gas engines.Consequently,efficient removal of VOSiC from biog
【机 构】
：
College of Chemistry and Material Science, Hebei Normal University, Shijiazhuang 050024, Hebei, Chin
论文部分内容阅读
Biogas can be used as an alternative energy source for producing heat and electricity;however,volatile methylsiloxanes (VOSiC) present in biogas can severely damage heat exchangers,turbines and gas engines.Consequently,efficient removal of VOSiC from biogas that is used as a biofuel is required.In this work,acetylated silica gel (Ac@SG) was synthesized,via treatment of microporous silica gel (SG) with acetic anhydride as an adsorbent,for removal of VOSiC from biogas,and characterized with XRD,SEM-EDS,N2-BET and FT-IR.This Ac@SG adsorbent exhibited a meso-/microporous structure and hydrophobic surface,indicating it was a more efficient adsorbent for removing hexamethyldisiloxane (L2) and octamethylcyclotetrasiloxane (D4) from biogas samples than conventional SG.It was found that the adsorption capacities of Ac@SG reached 304 mg L2/g for hexamethyldisiloxane and 916 mg D4/g for octamethylcyclotetrasiloxane at lower temperatures in the experimental range,and water had no significant effect on its absorption efficiency.The used Ac@SG could be easily regenerated by heating it at 110 ℃,and the adsorption capacity of recycled Ac@SG for hexamethyldisiloxane and octamethylcyclotetrasiloxane was kept constant in four recycle adsorption experiments.
其他文献
Shale fractures are an important factor controlling shale gas enrichment and high-productivity zones in the Longmaxi Formation,Jiaoshiba area in eastern Sichuan.Drilling results have,however,shown that the shale fracture density does not have a straightfo
Fracture systems in nature are complicated.Normally vertical fractures develop in an isotropic background.However,the presence of horizontal fine layering or horizontal fractures in reservoirs makes the vertical fractures develop in a VTI (a transversely
An effective parameter in the miscible-CO2 enhanced oil recovery procedure is the minimum miscibility pressure (MMP) defined as the lowest pressure that the oil in place and the injected gas into reservoir achieve miscibility at a given temperature.Flue g
Paraffin deposition is a severe global problem during crude oil production and transportation.To inhibit the formation of paraffin deposits,the commonly used methods are mechanical cleaning,coating the pipe to provide a smooth surface and reduce paraffin
Whether hydraulic fractures could connect multiple gas zones in the vertical plane is the key to fracturing treatment to jointly exploit coalbed methane and tight sandstone gas through integrative hydraulic fracturing in tight sandstone-coal interbedded f
Most inverse reservoir modeling techniques require many forward simulations,and the posterior models cannot preserve geological features of prior models.This study proposes an iterative static modeling approach that utilizes dynamic data for rejecting an
The basis of this study is to identify the versatility of N,N,N\'-trimethyl-N\'-tallow-l,3-diaminopropane (DTTM) surfactant in high saline environments.The surfactant was examined with sodium chloride,NaCl,to understand how triggers such as salt,pH,te
During hydraulic fracturing operations of low-permeability reservoirs,packers are the key component to ensure the success of multistage fracturing.Packers enable sections of the wellbore to be sealed off and separately fractured by hydraulic pressure,one
The present work deals with the reflection of plane seismic waves at the stress-free plane surface of double-porosity dualpermeability material.The incidence of two main waves (i.e.,P1 and SV) is considered.As a result of the incident waves,four reflected
Jet pulse assembly is one of the main components of jet hydraulic oscillator.The pressure wave characteristics produced by jet pulse assembly have an important influence on the performance of the tool.In this paper,the structure and working principle of j