Nonlinear resonance characteristics of a dual-rotor system with a local defect on the inner ring of

来源 :中国航空学报(英文版) | 被引量 : 0次 | 上传用户:hunshixiaozi
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In this paper,the nonlinear resonance characteristics of a dual-rotor system are investi-gated with the consideration of a local defect on the inter-shaft bearing of the system.A simplified model of the dual-rotor system is proposed by considering that there is a local defect on the inner ring of inter-shaft bearing.The local defect is modelled as an inverted isosceles trapezoidal groove,which can make great influence on the inter-shaft bearing force due to the change of radial clearance of the inter-shaft bearing.The motion equations of the dual-rotor system are formulated by using the Lagrange equation.The Runge-Kutta method is employed to solve the motion equation.The amplitude-frequency response curve of the dual-rotor system is obtained,the abnormal resonance characteristics are analyzed.In addition,the influence of defect parameters,rotors and support parameters and inter-shaft bearing parameters on the amplitude-frequency characteristics of the system are discussed.The results show that there are two main resonance peaks and four abnormal resonance peaks on the amplitude-frequency response curve of the dual-rotor with a local defect on the inner ring of the inter-shaft bearing.Through analyzing the vibration response of the abnormal resonance peaks,it is found that the first two abnormal resonances are caused by the combined res-onance,which are related to the inner ring fault and the rotational speed of high or low pressure rotors,and the last two resonances are caused by the induced resonance of the inner ring fault.At the same time,when the parameters of defect,rotors and support and inter-shaft bearing change,the resonance of the system also shows the corresponding change law.
其他文献
To study statistical characteristics of the random spray autoignition,aviation kerosene was injected transiently into non-vitiated air crossflow in a flow reactor with optical accesses.The operating conditions were relevant to gas turbine combustor:the ai
Aircrafts damages caused by lightning strikes have been known since the early days of aviation.However,the physical effects on the aircraft structure are still being investigated.This work seeks to evaluate the lightning strike effects in the aluminum all
Control technologies are innovated to satisfy increasingly complicated control demands of gas turbine engines.In terms of limit protection control,a novel model-based multivariable limit protection control method,which is achieved by adaptive command reco
Electron beam melting (EBM),as an excellent Additive Manufacturing (AM) technol-ogy,enables the printing of Ti-6Al-4V alloy for a wide range of applications such as aerospace and biomechanical industries.It improves functionality and integrity of componen
The efficiency parameters are studied in this paper for evaluating the compression qual-ity of the inlets with different compression degrees and assessing different design methods.Self-consistency is proposed for the efficiency parameters,based on two mat
Ammonia (NH3) is considered as a potential alternative carbon free fuel to reduce green-house gas emission to meet the increasingly stringent emission requirements.Co-burning NH3 and H2 is an effective way to overcome ammonia\'s relative low burning vel
This paper presents a practical and efficient design method for aircraft Mission Success Space (MSS) based on the entropy measurement (EM).First,fundamentals regarding MSS,Inverse Design (ID) and entropy are discussed.Then,two EM schemes of entropy-based
In this paper,a failure evaluation criterion was proposed for the bolted casing-flange structure under impact loading.Subsequently,ballistic tests with eighteen bolted casing-flange structure specimens were conducted to validate the failure evaluation cri
Hollow cathode discharges are widely used as neutralizers for the electric propulsion systems and recently developed into micro-thrusters for the small satellites.In this work,a dual-emitter hollow cathode thruster is developed,which can be operated in tw
State-of-the-art model-driven Direction-Of-Arrival (DOA) estimation methods for mul-tipath signals face great challenges in practical application because of the dependence on the precise multipath model.In this paper,we introduce a framework,based on deep