低速曲柄滑块六杆机构具有增力作用,广泛应用于冲床、压碎机等各种机构设备中。该机构设计时要考虑以下几个问题。1.滑块的压力问题影响滑块压力的因素较多,有各杆的长度、滑块处于极限位置时肘杆与滑块中心线的夹角θH(见图4)、曲柄回转中心的位置、轴柄的转向等等。如图4所示 Low-speed crank slider six-bar mechanism with a force, are widely used in presses, crushers and other institutions and equipment. The agency should consider the design of the following questions. 1. Slider pressure problems Slider pressure affects more factors, the length of each lever, the slider in the limit position when the elbow lever and slider center line angle θH (see Figure 4), the rotation center of the crank position , The steering shaft and so on. As shown in Figure 4