【摘 要】
：
Taping is often used to protect patterned wafers and reduce fragmentation during backgrinding of silicon wafers.Grinding experiments using coarse and fine resin-bond diamond grinding wheels were performed on silicon wafers with tapes of different thicknes
【机 构】
：
Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education,Dalia
论文部分内容阅读
Taping is often used to protect patterned wafers and reduce fragmentation during backgrinding of silicon wafers.Grinding experiments using coarse and fine resin-bond diamond grinding wheels were performed on silicon wafers with tapes of different thicknesses to investigate the effects of taping on peak-to-valley (PV),surface rough-ness,and subsurface damage of silicon wafers after grinding.Results showed that taping in backgrinding could provide effective protection for ground wafers from breakage.However,the PV value,surface roughness,and subsurface damage of silicon wafers with taping deterio-rated compared with those without taping although the deterioration extents were very limited.The PV value of silicon wafers with taping decreased with increasing mesh size of the grinding wheel and the final thickness.The surface roughness and subsurface damage of silicon wafers with taping decreased with increasing mesh size of grinding wheel but was not affected by removal thickness.We hope the experimental finding could help fully understand the role of taping in backgrinding.
其他文献
Seven-degree-of-freedom redundant manipu-lators with link offset have many advantages,including obvious geometric significance and suitability for configu-ration control.Their configuration is similar to that of the experimental module manipulator (EMM) i
As water reuse development has increased,biological stability issues associated with reclaimed water have gained attention.This study evaluated assimilable organic carbon (AOC) in effluents from a full-scale membrane biological reactor (MBR) plant and fou
The addition of nano zero-valent iron (nZVI) is a promising technology for the in situ remediation of soil.Unfortunately,the mobility and,consequently,the reactivity of nZVI particles in contaminated areas decrease due to their rapid aggregation.In this s
A redundantly actuated parallel manipulator(RAPM) with mixed translational and rotational degrees of freedom (DOFs) is challenged for its dimensionally homogeneous Jacobian modeling and optimal design of architecture.In this paper,a means to achieve redun
Reclaimed water has been widely applied in irrigation and industrial production.Revealing the behavior of emerging contaminants in the production process of reclaimed water is the first prerequisite for developing relevant water quality standards.This stu
Herein,nitrogen and sulfur co-doped carbon nanotubes (NS-CNT) adsorbents were synthesized via the chemical vapor deposition technique at 1000℃ by employing the camphor,urea and sulfur trioxide pyridine.In this study,desulfurization of two types of mercapt
Filled skutterudite is currently one of the most promising intermediate-temperature thermoelectric (TE) materials,having good thermoelectric transport performance and excellent mechanical properties.For the preparation of high-efficiency filled skutterudi
In our previous studies,several papermaking sludge-based flocculants (PSBFs) were synthesized from wood pulp papermaking sludge.The structure-activity relationships of the PSBFs have been investigated in simulated dye wastewater treatment,but their effici
High-efficiency and cost-effective catalysts with available strategies for persulfate (PS) activation are critical for the complete mineralization of organic contaminants in the environmental remediation and protection fields.A nanoscale zero-valent iron-
Although the torso plays an important role in the movement coordination and versatile locomotion of mammals,the structural design and neuromechanical control of a bionic torso have not been fully addressed.In this paper,a parallel mechanism is designed as