提高树木移植成活率的主要方法

来源 :新材料新装饰 | 被引量 : 0次 | 上传用户:red0035
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
随着城市的扩张,小区住宅及园林工程的建设,树木的地位也越来越重要。然而在绿化施工过程中,对于如何提高树木的成活率就成了工作的难点和重点。在移植树木时,相关人员应根据树木的特性,在合适的季节正确挖掘、运输及栽种树木,并对栽种后的树木进行有效管理,尤其是在苗木处理和移植方法上要处理得当,才能提高树木的移植成活率。那么对如何提高树木移植成活率就成了我们今天研究的课题。
其他文献
In the process of 2-D compressional wave propagation in a rock mass with multiple parallel joints along the radian direction normal to the joints, the maximum p
Spherical cobalt carbonate with high tap density, good crystallization and uniform particle size was prepared by controlled chemical crystal method using cobalt
The lubrication effectiveness of the composite lubricants, 50wt% ethylene bis-stearamide (EBS) wax + 50wt% graphite and 50wt% EBS wax + 50wt% BN, during the pow
This article reports the study on acid equilibrium during bioleaching of alkaline low-grade copper sulfide ore.Adding auxiliary agents 1# (sulfur) and 2# (pyrit
Particulate TiC reinforced 17-4PH and 465 maraging stainless steel matrix composites were processed by conventional powder metallurgy (P/M). TiC-maraging stainl
在新的历史条件下,烟草员工所面临的生活和工作压力越来越大,挑战越来越多,新情况、新问题层出不穷,新事物、新观念应接不暇,导致各种心理问题随之增加。如何让烟草员工在物
La(Mg1-xAlx) (x=0.2,0.4,0.6,0.8) alloys have been prepared using induction melting followed by annealing. It is found that partial substitution of Mg by Al does
To increase the adhesion strength between the coating and the substrate, sintered Ti(C,N)-based cermets were selected and deposited with monolayer TiN using a m
针对连铸连轧和冷装热轧并存环境下的炼钢-连铸生产调度问题,建立了基于浇次开浇时间的炉次指派和作业排序模型.在该模型中,通过浇次开浇时间单位提前/拖期成本的惩罚值的控
随着市场经济在我国的持续发展,越来越多的企业为了能在困境中寻求生存的出路,选择了并购重组。企业重组后,可以发挥协同效应,扩大市场占有率,实现规模经济,降低企业交易成本