论文部分内容阅读
(1)正确的起动方法。①踩下离合器(一些车型可配合使用减压机构)。②每次起动时间不得超过5s,如一次不能起动,应间隔10~15s后再起动,连续起动不得超过3次,以免大电流放电造成极板变形。③发动机起动后,应立即松开起动旋钮或将起动旋钮转回非工作位置,以截断电流。④严禁在发动机工作尚未停转时接通起动开关,以免损坏起动机和飞轮齿圈。⑤低温(大气温度或发动机温度低于15℃)起动时,应在发动机充分
(1) the correct starting method. ① step on the clutch (some models can be used with the decompression mechanism). ② Each starting time shall not exceed 5s, such as a can not start, should be 10 ~ 15s interval after the start, continuous start shall not exceed 3 times, in order to avoid large current discharge plate deformation. ③ After starting the engine, immediately release the start knob or turn the start knob back to the non-working position to cut off the current. ④ It is forbidden to switch on the starter switch while the engine is still working, so as to avoid damaging the starting gear and flywheel ring gear. ⑤ low temperature (atmospheric temperature or engine temperature below 15 ℃) start, the engine should be sufficient