在调整剪板机上、下刀片之间的间隙时,可用垫纸法替代塞尺非常方便。对加工单件或小批量生产需调整间隙时更为适用。当所剪工件材料对间隙另有要求时,可根据实际情况,用不同厚度的纸进行组合使用。表1列出了常 In the adjustment of the shears, the gap between the lower blade, padded paper method available instead of feeler is very convenient. The processing of single or small batch production to adjust the gap is more applicable. When the cut pieces of materials on the clearance otherwise required, according to the actual situation, with different thickness of the paper used in combination. Table 1 lists the usual