论文部分内容阅读
М—67М型采煤机用于回采厚度为0.7—1米的煤层,适于开采煤的截割阻力小于300千牛顿/米,沿走向回采倾角小于35°以及沿仰斜和倾斜推进倾角小于10°,顶板中等稳定的煤层。采煤机回采倾角超过9°的煤层时要使用安全绞车。这种采煤机在左右工作面内均可穿梭截煤,自开切口,可与《顿巴斯》型和М—97型支架配套使用,亦可配单体支柱使用,骑在С—48М、С—151、С—202和С—63М型输送机上运
The М-67М shearer is used for the recovery of coal seams with a thickness of 0.7-1 m. The cutting resistance suitable for mining coal is less than 300 kiloNewtons per meter, the mining inclination is less than 35 ° along the strike, Less than 10 °, the roof is medium stable coal seam. Shearer safety winches are required when shearer is mining coal seams with an inclination of more than 9 °. The coal shearer can cut coal in the left and right work surfaces and cut through it. It can be used with “Donbass” type and М-97 type scaffolds. It can also be used with single props to ride on С-48М , С-151, С-202 and С-63М type conveyor on the transport