论文部分内容阅读
现在,一个单位大都有两三台乃至更多的微机。但是,这些微机之间的信息交换绝大多数是通过软盘进行的。很多人总以为微机之间的通信需要购买Modem或一些高级软件才能进行。 事实上,实现两台微机间的近距离通信,最简单的方法只需三条各1.5米左右的导线。这种方法不但简便,而且数据传输速度快,质量可靠。具体连接方法如下:(1)准备三根各1.5米左右颜色各异的导线(主要用于接线时区分)。(2)找到位于甲、乙两台主机背面的9脚插座,分清插座上各脚的排列顺序。(3)把甲机9脚插座的②脚、③脚、⑦脚分别与乙机9脚插座的③脚、②脚、⑦脚相连。假设三根导线的颜色分别为红、青、白色。如果甲机的②脚、③脚、⑦脚分别接红、青、白线,则乙机的②脚、③脚、⑦脚分别接青、红、白线,这样甲、乙两机的连线就算接好了。(4)在甲、乙两机上分别启动LcpLink3.0(简称LL3)通信软件,这
Now, most of the units have two or three or even more computers. However, most of the exchange of information between these computers is done via floppy disks. Many people always think that communication between computers need to purchase Modem or some advanced software. In fact, the simplest way to achieve close communication between two computers is to have only three wires about 1.5 meters each. This method is not only simple, but also data transfer speed, quality and reliability. Specific connection method is as follows: (1) prepare three each about 1.5 meters of different colors of wire (mainly used to distinguish between the wiring). (2) Find a 9-pin socket located on the back of the two hosts A and B, distinguish the order of the pins on the socket. (3) The A machine 9 foot socket ② feet, ③ feet, ⑦ feet, respectively, B machine 9 feet socket ③ feet, ② feet, ⑦ feet connected. Suppose the color of the three wires are red, green and white respectively. If A machine ② feet, ③ feet, ⑦ feet were connected to red, green and white lines, the B ② feet, ③ feet, feet were respectively connected to the blue, red and white lines, so A, B and two even Even if the line is connected. (4) Launch the LcpLink3.0 (LL3) communication software on the A and B machines respectively, which