Study on Lubricant Materials Transfer between Head and Disk

来源 :哈尔滨工业大学学报(英文版) | 被引量 : 0次 | 上传用户:qq343246680
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
With the increase of hard disk storage density, the flying height of magnetic head sliders has become lower in recent years, which makes it easier for lubricant materials to transfer between the magnetic head and disk. The ability for lubricant materials to transfer is not only related to the operating conditions of disk but also related to the types of lubricant materials ( Perfluoropolyether, PFPE) and diamond?like carbon ( DLC) coating applied to the disk. Based on the principle of molecular dynamics, this study established the adsorption models on disks with different carbon content and the diffusion models of several common PFPE molecules in air. Besides, the adsorption energy and the diffusion coefficients of different models were calculated. Furthermore, the molecular weight, the molecular structure,the lubricant materials end functional groups, and the disks carbon content were found to have influence on the transfer ability of lubricant materials.In particular, the latter two factors have further influence.
其他文献
27.5kV电压互感器是牵引变电所低电压启动的保护动作的必要条件。在牵引变电所中,为保证低电压启动的保护可靠运行,一般设置四台电压互感器,2台一组,分别运行和备用。本文重点研
目前国内大多数接触网架线作业车最高运行速度为100Km/h,且只能用于超高不大于125mm的线路。当线路超高大于此值时,随着超高的增加,升降作业平台越来越倾斜,作业人员在平台上无法
Owing to the weak observability of the azimuth misalignment angle, alignment accuracy and time are always the contradictory issues in the initial alignment proc
电气化铁路牵引变电所馈线设立电流增量保护,可以有效切除高阻故障,保护牵引供电设备。但是投运后由于不能有效躲过机车负荷而引起保护频繁误动,致使运行现场不采用增大保护动作
会议
JZW-6型接触网综合作业车是(以下简称作业车)金鹰重型工程机械公司开发的新一代高速接触网综合检修车,最高时速160km/h,用于高铁接触网的检修和抢修。本文对接触网常见故障及检(抢
将温度监测与视频监控技术进行结合,应用于供电系统重点设备监控,通过对被测设备温度的实时监测及时发现温度异常设备并进行报警,提示值班人员通过视频系统对设备进行调阅,从而采
柏杨,台湾著名作家,不但命运多舛,情路亦相当坎坷。他一生娶过五位妻子,每一次婚姻,都伴随着一段如烟往事。 Bo Yang, a well-known writer in Taiwan, not only fate, love
当前,中国电气化铁道发展迅猛,牵引变电所使用的互感器需用量也越来越大,为了使互 感器产品适应电气化铁道的运行要求,提高运行的可靠性,为此,本文对电流互感器的原理及技术要求进
通过CATMOS弓网仿真软件对某条典型250km/h高速铁路接触网进行仿真研究,对仿真结果进行分析,得到了不同跨距下的最优吊索长度及吊弦位置,并得出了相关规律和结论。