【摘 要】
：
The hot deformation behavior of a Mg-Al-Y-Zn magnesium alloy was investigated by hot compressive testing on a Gleeble-1500 thermal simulator at the temperanging
【机 构】
：
School of Materials Science and Engineering
【基金项目】
：
The Key Laboratory for Nonferrous Metal of the Ministry of Education of China
论文部分内容阅读
The hot deformation behavior of a Mg-Al-Y-Zn magnesium alloy was investigated by hot compressive testing on a Gleeble-1500 thermal simulator at the temperanging from 523 to 673 K with the swain rate varying from 0.001 to 1s-1.The relationships among flow stress,swain rate,and deformation temperature were analyzed,and the deformation activation energy and stress exponent were calculated.Microstructure evolution of the alloy under different conditions was examined.The results indicated that the maximum value of the flow stress increased with the decrease of deformation temperature or the increase of swain rate.Under the present deformation conditions,dynamic recrystallization (DRX) oeettrred in the alloy,which was the main softening mechanism during deformation at elevated temperature.The deformation temperature and strain had significant effects on the microstructure of the alloy.
其他文献
The flow field formed when an aluminum ribbon is produced by twin-belt rapid solidification is simulated with the solu- tion algorithm (SOLA)-volume of fluid (V
The SnO2-polyaniline(SnO2-PAn) composite was prepared by microemulsion polymerization method using aniline, ammonium peroxodisulfate and SnO2 as starting materi
For vehicle integrated navigation systems, real-time estimating states of the dead reckoning (DR) unit is much more difficult than that of the other measuring s
On the basis of the microscopic phase-field dynamic model and the microelasticity theory, the characteristics of the coarsening behavior of γ phase in Ni-AI al
In view of the problem that the current single-antenna GPS attitude determination system can only determine the body attitude when the sideslip angle is zero an
The effects of polyurethane sponge pretreatment and slurry compositions on the slurry loading in precursor were discussed, and the,performances of stainless ste
The effect of heat treatment on the microsructure evolution of a high Nb containing TiAl alloy has been studied.The results indicate thatβ-segregation,α-segre
Based on the phase equilibrium calculation of the Ti-Al-N ternary system,the interfacial reactions and the phase formation sequences between different types of
The influence of quench transfer time on the microstructure and mechanical properties of 7055 aluminum alloy with and without zirconium was investigated by tens
A robust attitude tracking control scheme for spacecraft formation flying is presented.The leader spacecraft with a.rapid mobile antenna and a camera is modeled