论文部分内容阅读
我公司自制了一台简易折叠式三角吊架,经过试用,性能良好。一、结构(见示意图) 该吊架底盘9是用型钢粗焊的长方形框架,上下主杆7、8截面呈三角形,以两根10~#槽钢和一根φ89的无缝管作为立柱、三面焊上φ3/4″管子作为腹杆。上料盘1以槽钢为滑道上下移动。底盘9的另一端有一龙门架12,卷扬机5就安装在龙门架下面。龙门架上有一托轮,
Our company has made a simple folding triangle hanger, which has been tested and has good performance. First, the structure (see diagram) The hanger chassis 9 is a rectangular frame welded with steel, the upper and lower main rods 7, 8 cross section is triangular, with two 10# channel steel and a φ89 seamless pipe as the column, The three sides are welded with φ3/4′′ pipe as the web. The feeding plate 1 moves up and down with the channel steel. The other end of the chassis 9 has a gantry 12 and the hoist 5 is installed under the gantry. There is a supporting roller on the gantry. ,