论文部分内容阅读
在烧结厂及球团厂,圆筒混料机及造球机获得广乏的应用。它是和带式运输机联合工作的,带式运输机可沿水平方向或以小的倾斜角向上或向下运行。这种形式的混料机及造球机(图1)由圆筒1、给矿槽2、卸料装置3、焊接框架4、支承辊5、轮圈6、开式齿轮传动7、减速器8及电动机9组成。经过齿轮传动把扭矩传给圆筒。当圆筒混料机及造球机工作时,动载荷传给楼板。这对于建筑物的构架是特别危险的。轮圈、辊子及齿轮啮合的几何形状的轻微变化就会产生振动。同样,在圆筒中由于配料的不对称分布也造成振动。在生产条件下,由于有很高的动负荷,直径为2800毫米的圆筒廻转
In the sintering plant and pelletizing plant, cylindrical mixer and ball machine access to a wide range of applications. It works in conjunction with a belt conveyor that can run upwards or downwards in a horizontal direction or at a small angle of inclination. This form of mixer and pelletizing machine (Figure 1) by the cylinder 1, to the ore tank 2, the discharge device 3, the welding frame 4, the support roller 5, rim 6, open gear drive 7, 8 and motor 9 composition. After the gear transmission torque to the cylinder. When the cylinder mixer and ball machine work, dynamic load transfer to the floor. This is particularly dangerous for the architecture of a building. Slight variations in the geometry of the rim, rollers, and gears can cause vibration. Likewise, vibrations are also caused in the cylinder due to the asymmetrical distribution of the ingredients. In the production conditions, due to the high dynamic load, the diameter of 2800 mm cylinder 迴 turn