Real-time observation of vortex mode switching in a narrow-linewidth mode-locked fiber laser

来源 :PhotonicsResearch | 被引量 : 0次 | 上传用户:zhangjiakou00
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Temporal and spatial resonant modes are always possessed in physical systems with energy oscillation. In ultrafast fiber lasers, enormous progress has been made toward controlling the interactions of many longitudinal modes, which results in temporally mode-locked pulses. Recently, optical vortex beams have been extensively investigated due to their quantized orbital angular momentum, spatially donut-like intensity, and spiral phase front. In this paper, we have demonstrated the first to our knowledge observation of optical vortex mode switching and their corresponding pulse evolution dynamics in a narrow-linewidth mode-locked fiber laser. The spatial mode switching is achieved by incorporating a dual-resonant acousto-optic mode converter in the vortex mode-locked fiber laser. The vortex mode-switching dynamics have four stages, including quiet-down, relaxation oscillation, quasi mode-locking, and energy recovery prior to the stable mode-locking of another vortex mode. The evolution dynamics of the wavelength shifting during the switching process are observed via the time-stretch dispersion Fourier transform method. The spatial mode competition through optical nonlinearity induces energy fluctuation on the time scale of ultrashort pulses, which plays an essential role in the mode-switching dynamic process. The results have great implications in the study of spatial mode-locking mechanisms and ultrashort laser applications.
其他文献
利用激光微束穿刺法将苏云金芽孢杆菌的毒蛋白(δ-endotoxin)基因导入了油菜,经聚合酶催化链式反应(PCR)和PCRSouthern杂交证明抗虫基因已导入油菜基因组中并能在T1代得到遗传。对转基因植株进行了抗虫性测试,结果表明某些植株具有较好的抗虫性,并且这种抗虫性在T1代仍能保持。实验结果表明抗虫基因已整合进油菜基因组并得到了稳定的遗传。
The generation of high-peak-power, few-cycle mid-infrared (MIR) pulses using coherent beam combination and nonlinear pulse compression techniques simultaneously is demonstrated. The two pulses, with identical pulse energy of 2.8 mJ and pulse duration of 1
期刊
为解决在复杂变光照环境下车道标识线的辨识问题,实现全天候环境的车道偏离预警,提出了一种新的车道标识线辨识算法。将基于OTSU算法的自适应图像分割技术用于在不同光照环境下车道标识线的划分,对图像的全局阈值和局部阈值进行加权处理得到自适应阈值,采用45°与135°梯度方向的Sobel算子提取车道边缘信息,通过改进Hough变换方法完成车道标识线的辨识过程。对不同光照环境下的道路图像进行对比实验,结果表
介绍了一种利用强脉冲激光诱导产生的冲击波压力来进行金属表面改性的新技术——受控激光喷丸强化技术,可以大幅度提高金属材料的疲劳寿命和抗应力腐蚀能力,但疲劳寿命和抗应力腐蚀能力并不总随着喷丸强度的提高而线性增加。最佳的疲劳寿命和抗应力腐蚀能力常出现在特定的残余压应力水平和分布下,也即取决于喷丸参数的最佳组合。由于激光喷丸中工艺参数对喷丸后工件表层的残余应力场有决定性的影响,如何依据已给的疲劳寿命和抗应力腐蚀能力来合理确定喷丸强化的工艺参数成为目前主要的研究方向。受控激光喷丸的机理与残余应力的形成过程密切相关。
苏联某些定型激光器的参数。
期刊
We report the transformation of a linear electro-optically tunable non-phase-matched second-order nonlinear process into a cascaded second-order nonlinear process in a bulk KTP crystal to generate the effect of electro-optically tunable Kerr-type nonlinea
针对在K418薄壁叶片上局部再制造的多层立体成形组织难以调控优化的难点,开展该类合金激光再制造覆层工艺及组织研究。优选三组工艺进行Inconel 718成形试验,观察覆层显微组织,测试其力学性能,对比分析并进行单道多层立体成形试验。成形优化工艺的参数为激光功率为1.2 kW、扫描速度为300 mm/min、送粉速率为25 g/min、气体流速为3 L/min、脉宽为10 ms、占空比为1∶1。试验结果表明:单道覆层与基体形成了良好的冶金结合,高度和宽度分别为1.537 mm、1.414 mm,覆层主要由细
本文采用傅里叶变换红外光谱和二阶导数谱分析方法,首次对不同产地的壁虎药材进行了测定分析,得到壁虎药材红外光谱指纹图谱的共有模式。结果表明,不同产地壁虎药材的红外光谱相似程度较高,差异主要表现在峰位的细微变化和峰的相对强度方面,1800~400 cm-1为该药材的红外光谱指纹区。壁虎药材的红外光谱指纹图谱鉴别特征明显,稳定性、重现性较好,可作为该药材快速鉴别和质量整体性评价的一种新方法。
作为一种新型拓扑材料,外尔半金属及其光学性质是当前凝聚态物理以及光学领域的研究热点。根据人们的最新研究成果,介绍了第一类与第二类外尔半金属界面上菲涅尔反射系数的计算方法,模拟并揭示了不同化学势下菲涅尔反射系数随入射角θi和狄拉克锥倾斜度αt的演变规律。研究结果表明,随着化学势和狄拉克锥倾斜度αt的变化,第一类与第二类外尔半金属的反射系数以及布儒斯特角呈现出不同的演变规律。理论上可以通过化学掺杂并测量外尔半金属界面上的菲涅尔反射系数来判断外尔半金属的种类。
报道了一种结构紧凑、成本低、稳定性高、操作简单,可应用于皮肤病学及医疗美容领域的黄光激光器。该激光器采用高功率保偏掺镱光纤激光器泵浦级联拉曼嵌套腔的结构,通过使用窄带宽的1178 nm光纤布拉格光栅以及优化拉曼增益光纤的长度,获得了高功率窄线宽线偏振1178 nm激光。结合基于周期极化钽酸锂晶体的单通倍频方式,实现了10.19 W连续波589 nm激光的输出,倍频效率为18.12%。此外,研制的工程样机功率峰峰值浮动小于2%。