【摘 要】
：
The microstructural evolution of the A2017 semi-solid alloy billets provided with rheocasting and extruding/extending forming by shearing-cooling-rolling(SCR) t
【机 构】
：
School of Materials and Metallurgy
论文部分内容阅读
The microstructural evolution of the A2017 semi-solid alloy billets provided with rheocasting and extruding/extending forming by shearing-cooling-rolling(SCR) technology during reheating in semi-solid state was investigated. The microstructural differences and their generation causes for both billets were also analyzed. The results show that during reheating, the grains of rheocasting billets grow up and spheroidize gradually with the prolongation of isothermal holding time, the eutectic liquid phase at low melting point forms mainly among the grains. However, the grains of the extruding/extending forming billets grow up abnormally through grain coalescence in the initial stage of the reheating, the entrapment of large amount of liquid within grains occurs, and the grain sizes in the reheating billets are coarse and inhomogeneous. Compared with extruding/extending forming billets, rheocasting billets have smaller and uniform grains in reheating microstructure and can rapidly form liquid phase among grains. Therefore, rheocasting billets are more suitable for the semi-solid forming than the extruding/extending forming billets.
其他文献
Elastic metallic-plastic pads(EMP) were irradiated by low energy aluminum ion in a metal vapor vacuum arc(MEVVA) 80-10 implantation system. The samples were irr
The thermogravimetric analysis of a ternary Cu-25Ni-30Cr alloy prepared by conventional casting was performed in 0.1 MPa pure O2 at 700 - 800 ℃. The results sh
小区景观设计要坚持以人为本,尊重自然、尊重生态、追求和谐,贴近生活,将交流沟通、娱乐休闲、健康运动、成长服务等有机分区组合.本文结合若耶明殊小区,探讨景观设计中自然
A vertical tubular desalination unit with shell and tube structure was built to perform humidification and dehumidification simultaneously on the tube and shell
CexZr1-xO2 complex oxides doped by transition metal(Fe, Mn, Cu) were prepared by precipitation method. Thermal stability of samples was characterized by XRD, su
The filling and solidification in centrifugal field, as well as the forming mechanism of off-center porosities were summarized, based on the mathematical model
A 3D mathematical model is developed to calculate the temperature and velocity distributions in a moving gas tungsten arc (GTA) welding pool with different sulf
Turbulent swirling flows and methane-air swirling diffusion combustion are simulated by both large-eddy simulation (LES) using a Smagorinsky-Lilly subgrid-scale
Al-alloy (AA5022) corrosion penetration (CP) and crystal structure were investigated after running static immersion corrosion tests in 1 mol/L HCl solution and
The phase diagrams of microemulsion CTAB/butanol/cyclohexane/aqueous solution of nitrate (or aqueous solution of ammonium salt) were determined and the structur