环氧胶对众多的材料具有卓越的粘着性,只需对被粘结的表面进行简易的处理,即可获得良好的粘结,若要求最大的强度,则要施行进一步的处理。其一般处理方法如下: 去脂:去油与脱脂极为重要,可依下述各种方法获致:—— 1、三氯乙烯汽化去脂; 2、以碱性盐溶液乳化或电解去脂; 3、以含水去垢剂,拭擦,然后用清水彻底冲洗并小心干燥; 4、以三氯乙烯净擦。 切勿使用不洁的碎布或溶剂,以免沾 Epoxy adhesives have excellent adhesion to a wide range of materials. Simply tack the bonded surfaces to get a good bond, and if maximum strength is required, further processing is required. The general approach is as follows: Grease: degreasing and degreasing is extremely important, can be obtained according to the following methods: - 1, trichlorethylene vaporized degreasing; 2, alkaline salt solution emulsified or degreased; 3 , With aqueous detergent, wipe, and then rinse thoroughly with water and carefully dried; 4, to trichlorethylene net wipe. Never use unclean rags or solvents to avoid sticking