一、换装履带板的方法工作中,如发现东方红—60T推土机一侧履带有6～7节履带板需要更换时,可先打开一处接头,将一块新履带板接上,然后让推土机小油门低速向前驶,这时接第二块履带板;推土机再向前缓缓移动,接着接第三块履带板;照此方法将新履带板全部装上,接着将覆带接头重新接好,并将覆带松紧丝杆调整到要求的范围,此时推土机即可投入工作。此种方法简便易行,一人即可完成。 First, the method of dressing track shoes In the work, such as Dongfanghong-60T bulldozers found on one side of the track 6 to 7 track shoes need to be replaced, you can open a joint, a new track shoe connected, and then let bulldozers The small throttle moves forward at low speed, then the second track shoe is connected; the bulldozer moves forward slowly and then the third track shoe; in this way, all the new track shoes are loaded, and then the cover joint is reconnected Good, and will be covered with elastic screw adjusted to the required range, then bulldozers can be put into work. This method is simple and easy, one person can be completed.