制作日海公司数字配线架同轴头的步骤 :1.清洁待接续的电缆。2 .将电缆头尾管与压接套管依次套入电缆。3.用专用剥线钳 ,选取适当的刀孔将电缆外塑料层剥除 ,注意力量适中 ,不能损坏屏蔽层。4 .用镊子松开屏蔽层。5 .再用剥线钳将内尾塑料护层剥除 ,注意不能将芯线剪断。6 .将 Steps for making digital coaxial cable head of SUNIX Company: 1. Clean the cable to be connected. 2. The cable head and tail pipe and crimp casing followed by sets into the cable. 3. With a special wire stripper, select the appropriate hole to strip the plastic layer outside the cable, pay attention to moderate power, can not damage the shield. 4. Release the shield with tweezers. 5 and then use wire strippers to peel the inner plastic sheath, be careful not to cut the core wire. Will be