【摘 要】
：
Polycrystalline bulk Ti3SiC2 material with a high purity and density was fabricated by spark plasma sintering from the elemental powder mixture with starting co
论文部分内容阅读
Polycrystalline bulk Ti3SiC2 material with a high purity and density was fabricated by spark plasma sintering from the elemental powder mixture with starting composition of Ti3Si1-xAlxC2,where x=0.05-0.2.X-ray diffraction patterns and scanning electron microscopy photographs of the fully dense samples show that a proper addition of aluminum promotes the formation,and accelerates the crystal growth rate of Ti3SiC2,consequently results in a high purity of the prepared samples.The synthesized Ti3SiC2 is in plane-shape with a size of about 10-25μm in the elongated dimension.Solid solution of aluminum decreases the thermal stability of Ti3SiC2,and lowers the temperature of Ti3SiC2 decomposeing to be 1300 ℃.
其他文献
An X-ray diffractometer that equipped with a two-dimensional detector is used for developing the technique of grainsize measurement for strong textured and coar
丹江口水库大坝加高工程和汉江中下游6个梯级建成后,汉江下游防洪形势大为改善,针对杜家台分蓄洪区土地资源利用水平不高、人水争地、人口不断增长、无序开垦、建设管理滞后
A model combined both macroscopic transport and microstructural evolution is applied to describe the influence of thermosolutal convection on microstructural ev
A mathematical model of multistage and multiphase reactions in flash smelting furnace, which based on the description of chemical reactions and reaction rate, i
A new type of compound conduit is designed and the finite element method (FEM) is applied to analyze the mechanicalperformance of a typical compound conduit. Th
环境监测数据的真实性、有效性是环境监测工作的生命线,本文通过运用耗散结构理论,对环境监测质量的控制系统进行了探讨,提出了动态控制的新观念。
It is reported that laser-processing is effective to repair the heat checks, which are fine shallow cracks on a surfaceof die-casting dies.
垃圾焚烧炉是实现垃圾的无害化和减量化处理的有效方法,科学地设计工作应结合生活垃圾的焚烧特点和有关设计标准规范进行,这是确保垃圾妒高效运行的关键.
The liquid-phase-impacting (LPI) diffusion welding mechanism and microstructure of welded joint of aluminum matrixcomposite SiCp/101A have been studied. It show
An improved sheet hydroforming process with a movable die is proposed and investigated by elastoplastic FEM. The effects of varied process parameters on the def