玻璃纤维增强尼龙是通过机械混和的方法,将经过热处理或经表面处理剂处理过的玻璃纤维与尼龙料均匀混合在一起,从而使玻璃纤维在尼龙料中起到增强作用.玻璃纤维热处理的目的是为了除去玻璃纤维表面的润滑剂.因为玻璃纤维由于摩擦会引起强度下降,所以在玻璃纤维的表面上喷上了一层润滑剂,而这层润滑剂的存在影响玻璃纤维同尼龙之间的粘结力,从而降低增强塑料的强度,因此,必须将这部分润滑剂去除.至于除去润滑剂的方法,可以用化学方法,如用洗涤,也可用物理方法,如加 Glass fiber reinforced nylon by mechanical mixing method, the heat treatment or surface treatment agent treated glass fiber and nylon material evenly mixed together, so that the glass fiber in the nylon material to play a role in. Glass fiber heat treatment purposes Is to remove the surface of the glass fiber lubricant.Because the fiberglass friction will cause the strength to drop, so the surface of the glass fiber sprayed with a layer of lubricant, and the presence of this layer of lubricant affects the glass fiber with nylon Adhesion, thereby reducing the strength of the reinforced plastic, therefore, this part of the lubricant must be removed.As for the method of removing the lubricant, chemical methods such as washing can also be used, but also physical methods such as adding