Origin of strong solid solution strengthening in the CrCoNi-W medium entropy alloy

来源 :材料科学技术(英文版) | 被引量 : 0次 | 上传用户:wyk3601
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Solid solution strengthening is one of the most conventional strategies for optimizing alloys strength,while the corresponding mechanisms can be more complicated than we traditionally thought specifically as heterogeneity of microstructure is involved.In this work,by comparing the change of chemical distribution,dislocation behaviors and mechanical properties after doping equivalent amount of tungsten (W) atoms in CrCoNi alloy and pure Ni,respectively,it is found that the alloying element W in CrCoNi alloy resulted in much stronger strengthening effect due to the significant increase of heterogeneity in chemical distribution after doping trace amount of W.The large atomic scale concentration fluctuation of all elements in CrCoNi-3W causes dislocation motion via strong nanoscale segment detrapping and severe dislocation pile up which is not the case in Ni-3W.The results revealed the high sensitivity of elements distribution in multi-principle element alloys to composition and the significant consequent influence in tuning the mechanical properties,giving insight for complex alloy design.
其他文献
This study used the pseudo-spinodal mechanism to obtain the ultrafine α phase for designing high-strength titanium alloy.Diffusion multiple experiments were de
This study investigates the effects of fine and coarse undissolved particles in a billet of the Mg-7Sn-1Al-1Zn (TAZ711) alloy on the dynamic recrystallization (
A phase-field model coupling with elastoplastic deformation and creep damage has been built to study the microstructural evolution and deformation behavior for
通过化学成分检测、室温力学性能分析以及金相组织观察、形貌观察、腐蚀产物分析等方法,分析了铜合金截止阀阀瓣密封腐蚀的原因.结果 表明,截止阀阀瓣成分、组织及性能均满足
Phase field simulations incorporating contributions from chemical free energy and anisotropic interfacial energy are presented for the β→α transformation in
A grain-size gradient NiTi ribbon with multiple-step shape transition was papered by means of melt-spinning.The ribbons contain coarse and fine grains in the fr
The increasing utilization of titanium alloys in marine environments makes their microbiologically influenced corrosion study a timely matter.This work demonstr
Twin crystal structured Al-10 wt.% Mg alloys that were grown over a broad solidification velocity range were prepared and studied for the first time.The high the
Solar-blind deep-ultraviolet (DUV) photodetectors based on Ga2O3 have attracted great attention due to their potential applications for many military and civil
The effect of adding D-fructose to simulated body fluid (SBF) on the corrosion behavior ofAZ31 magnesium (Mg) alloy at 37 ℃ and at a pH of 7.4 was studied by p