【摘 要】
：
The protective behavior for a molten AZ91D alloy in an open melting face was investigated under a protective gas mixture containing 3％ SO2 and 97％ CO2,and the pro
【机 构】
：
Department of Materials Science & Engineering, Heilongjiang Institute of Science and Technology, Har
论文部分内容阅读
The protective behavior for a molten AZ91D alloy in an open melting face was investigated under a protective gas mixture containing 3％ SO2 and 97％ CO2,and the protection mechanism was discussed.Experimental results show that the gas mixture provides effective protection for AZ91D melt in the temperature range from 680 ℃ to 730 ℃.The microstructure,chemical composition and phase composition of the surface film formed on the molten AZ91D alloy were analyzed using scanning electron microscopy (SEM) with energy dispersive spectrometer (EDS) and X-ray diffraction (XRD).The SEM results demonstrate that the surface films with an average thickness between 0.5 μm and 2 μm are dense and coherent in the protected temperature range.The EDS results reveal that the surface film mainly contains elements S,C,O,Al and Mg.The XRD results show that the surface film consists of MgO,MgS and a small amount of C phase.
其他文献
水利工程项目后评价是水利工程管理中一个非常重要的阶段,它是工程管理的发展与延伸.为了提高工程效率,总结历史经验,水利工程项目后评价是一个必不可少的过程.而我国的水利
随着我国城镇化的逐步推进,对生活品质提出了新的要求,其中以对燃气的需求尤为明显,因此对于燃气管道工程管理的重要性逐渐被人们所关注,如何避免城镇燃气管道工程中的常见安
目前，辽宁部分学校开展了“分组联动”模式的教学教研活动，任课教师积极准备，认真设计每一堂课。通过“分组联动”，调动和发挥了学生的多样性和主动性，变革了学习方式，改变了学生学
改革开放以来我国经济迅猛发展,尤其是石油产业,成为国民经济的产业支柱,与此同时随着国际石油竞争加剧,石油储量日渐减少的压力及不断前进的科学技术都对石油产业工程技术提
病例1:男,22岁,未婚,职业为出纳员,病例号261017。患者入院前40余天不规则发热38～40℃,右颈部有蚕豆大小肿物,并逐渐增大且局部疼痛。外院曾按淋巴结核予以抗痨治疗,无效,遂
随着科学技术的不断进步,大型、特大型石油化工地面工程项目陆续涌现,为更好地整合资源、降低成本、分散风险、提高管理水平、提高竞争力,工程承包商联合起来共同投标和实施
新闻编辑作为新闻产生的重要组成部分,对新闻行业运转具有非常积极的作用,已经成为新时期人们关注的焦点.本文主要从新闻编辑创新能力培养出发,对创新能力培养的重要性和培养
近几年来,诸如“500元月薪聘本科生”、“零工资就业”等大学生“薪酬跳水”新闻时常见诸报端,似乎昭示着大学毕业生“低工资时代”的来临。而另一方面,譬
In recent years,
A cellular automaton model has been developed to simulate the microstructure evolution of a C-Mn steel during the peritectic solidification.In the model,the the
The compressive properties of aluminum foams by gas injection method are investigated under both quasi-static and dynamic compressive loads in this paper.The ex