冷轧厂1#镀锌生产线整条生产线全长约330m,分多层折返布置,属于三维多层平行传送辊系。该产线自投产以来,经过一段时间的使用,卷取段在生产过程中陆续出现带钢跑偏、辊子磨损、卷取溢边等现象,其中1#卷取机的溢边较为严重。钢卷溢出边等现象严重影响了镀锌线的产品质量和外观形,大大降低了机组的作业率和产品的成材率。从而影响到冷轧厂的效益,也影响到冷轧厂的钢卷形象。 Cold rolling mill 1 # galvanized production line of the entire production line of about 330m, sub-multi-layer reentry arrangement, belonging to the three-dimensional multi-layer parallel transmission roller system. Since the production line was put into production, after a period of use, the take-up section successively appeared strip deviation, roller wear and over-curling in the production process. The overflow edge of No. 1 take-up machine was more serious. Coil overflow and other phenomena seriously affected the quality of galvanized wire products and appearance, greatly reducing the unit operating rate and product yield. Thus affecting the benefits of cold rolling mill, but also affect the cold rolling mill coil image.