在操作机正常工作以后,手工司锤的问题就必须解决。经过上百次试验、改进,终于试制成功气动自动开锤装置,装在5吨锤上,运转正常。现在司锤工只需按按钮,调节手把就行了,不但大大减轻了劳动强度,而且操作机的作用也进一步发挥了。 After the operation machine is working normally, the problem of manual hammer must be solved. After hundreds of tests, improvements, and finally successfully pilot pneumatic automatic hammer device installed in 5 tons of hammer, the normal operation. Hammer now only need to press the button, adjust the handle on the line, not only greatly reduce the labor intensity, but also the role of operating machine has also been further played.