介绍了近年来国内外铸造工作者提出的一些新的Ｖ法铸造成型方法，这些方法包括软化薄膜法，纤维素溶液成型，树脂壳层法，橡胶质薄膜成型法，以及复合造型方法等。也介绍了改善Ｖ法铸件机械性能的方法，如表面合金化，涂料中加入孕育剂等。Ｖ法工艺控制不当时，铸件会形成表面粘砂，概述了粘砂产生原因和人们新近提出的防止粘砂的方法。 In this paper, some new casting method of V method proposed by foundry workers at home and abroad in recent years are introduced. These methods include softening film method, cellulose solution forming, resin shell method, rubbery film forming method and composite modeling method. Also introduced to improve the mechanical properties of V casting methods, such as surface alloying, coating inoculant added. V method of improper process control, the casting surface will form a sticky sand, outlined the causes of sticky sand and people recently proposed to prevent sticky sand method.