轮窑一般都是用经过干燥的砖坯来进行生产的.有时红砖销路好,又有大量的干坯,想增加产量,再点第二部火时,却因烧大灶点火工序麻烦.成本又高.不敢轻易点火;有时没有足够的干坯进窑或有其他原因.欲停一部火,又考虑点火成本高.不敢轻易停火.为了解决这个难题.我厂根据分火道原理.利用分火道点第二部火,其费用仅为原来的1/3,且其点火、停火可以随心所欲.从而提高了产品的产量、质量及成品率.保证了生产顺利进行.具体做法如下.a.由于分火时第二部火的火速比第一部火速慢,所以分火道应设在轮窑中心偏1～2个窑门为 The wheel kiln is usually made of dried bricks. Sometimes the red bricks have a good market, and there are a large number of dry billets. If you want to increase the output, when you order the second fire, you will have trouble with the burning process of the large stove. High. Do not dare to light; Sometimes there is not enough dry billet into the kiln or there are other reasons. To stop a fire, but also consider the high cost of ignition. Dare not easily ceasefire. In order to solve this problem. I plant based on the principle of fire. Using the second fire at the sub-fire point, the cost is only 1/3 of the original, and its ignition and ceasefire can be arbitrary. This will increase the output, quality and finished product rate of the product and ensure the smooth production. The specific approach is as follows. a. Since the fire speed of the second fire is slower than that of the first fire during the sub-fire, the sub-fire lanes should be located in the center of the kiln with 1 to 2 kiln doors.