人们常常认为,采用相应地提高磨矿介质的硬度来降低磨损率的办法就可提高研磨效率,但正如每个磨矿介质制造者所知,这未必尽然。 一般来说,把磨矿介质的平均硬度增至最大限度,则可把磨矿介质的磨损率减小到最低限度。但是,英国的一家主要磨矿技术公司—Helipebs有限公司在引 It is often accepted that the use of a corresponding increase in the hardness of the grinding media to reduce the wear rate can increase the grinding efficiency, but this is not necessarily true, as each mill media manufacturer knows. In general, the average hardness of the grinding media to maximize, you can reduce the wear rate of grinding media to a minimum. However, Helipebs Ltd, a major British mining technology company, is quoting