【摘 要】
：
The as-cast multi-element Mg-4Gd-1Y-1Zn-0.5Ca-1Zr alloy with low rare earth additions was prepared,and the solution treatment was applied at different temperatures.The microstructural evolution of the alloy was characterized by optical microscopy and scan
【机 构】
：
School of Materials Science and Engineering, Nanjing Institute of Technology, Nanjing 211167, China;
论文部分内容阅读
The as-cast multi-element Mg-4Gd-1Y-1Zn-0.5Ca-1Zr alloy with low rare earth additions was prepared,and the solution treatment was applied at different temperatures.The microstructural evolution of the alloy was characterized by optical microscopy and scanning electron microscopy,and corrosion properties of the alloy in 3.5％ NaCl solution were evaluated by immersion and electrochemical tests.The results indicate that the as-cast alloy is composed of the α-Mg matrix,lamellar long-period stacking-ordered (LPSO) structure and eutectic phase.The LPSO structure exists with more volume fraction in the alloy solution-treated at 440 ℃,but disappears with the increase in the solution temperature.For all the solution-treated alloys,the precipitated phases are detected.The corrosion rates of the alloys decrease first and then increase slightly with the increase in the solution temperature,and the corrosion resistance of the solution-treated alloys is more than four times as good as that of the as-cast alloy.In addition,the alloy solution-treated at 480 ℃ for 6 h shows the best corrosion property.
其他文献
The voltage was recorded to investigate the influence of the static magnetic field on droplet evolution during the magnetically controlled electroslag remelting (MC-ESR) process.MC-ESR experiments were carried out under different remelting current,and tra
In this study,the degradation efficiencies of zero-valent iron (ZVI) powders with different structures and components were evaluated for methyl orange (MO).The results show that the structure is an essential factor that affects degradation,and added non-m
The tribocorrosion behavior of 304 stainless steel was studied through comparing the damage behavior of 304 stainless steel in dilute sulfuric acid to that in distilled water by a reciprocating tribotester.The re-passivation behavior,the surface and secti
The as-rolled AZ31 Mg alloy sheets are welded by friction stir welding (FSW) in this study,followed by annealing and hot rolling with different reductions.The effects of welding speed and the rolling reduction on the microstructure,tensile properties,micr
In this study,the effect of pre-deformation at recrystallization and non-recrystallization zone on the grain ultrafining by the subsequent intercritical deformation (ID) was investigated on low-carbon microalloyed steel.The results showed that ultrafine g
Influence of different electric current modes (pulse and direct) on occurrence of the electroplastic effect under uniaxial tension in the coarse-grained alloys with martensite transformations is investigated.The materials are shape memory Ti49.3Niso.7 all
Thermal fatigue behaviors of two forged hot-work die steels subjected to cyclic heating (650 ℃)-water quenching were investigated.A martensitic hot-work die steel containing 10％ Cr (HHD),showing superior oxidation resistance and thermal fatigue resistance
The plastic deformation of the pipe made of Cu-based alloy hardened by incoherent nanoparticles and subjected to the uniform internal pressure was investigated.The limits of elastic and plastic resistance are determined.The insignificant excess in the lim
The secondary phases of the steels have significant effects on the microstructure and mechanical properties,making controlling these secondary phases important.The control of MnS inclusions and AlN precipitates in a N-alloyed high-Mn twin-induced plastic